“I currently have a 30 amp. What amp is required/recommended? Also, what kind of outlet does it plug into? What kind of electrical receptacles does it use?”
Answer This Question
1-10 of 10 Answers
It comes with bare copper cables that you wire into your electrical receptacle with wire nuts. I suppose you could wire it to a plug but you'd be in control of both the male and female side. I think 30A should be fine
Sorry, there was a problem. Please try again later.You should use a minimum 40 amp breaker for this with 8-3 wire. It is a direct splice wire hook up
Sorry, there was a problem. Please try again later.Hi Al, Thank you for reaching out and we hope you are in good health. We appreciate your interest in Samsung home appliances, specifically with Samsung - 30" Double Wall Oven with Flex Duo, Steam Cook and WiFi - Stainless steel. The home appliance uses a hard-wired electrical connection that uses a range of Amperes (between 20 - 50), depending on the KW rating. I have shared the user manual link below. Please access the link and turn to pages 9 - 10, 13 - 14 for the electrical connection. https://downloadcenter.samsung.com/content/EM/202003/20200306172627089/Install_NW9000K_DG68-00862A-09_EN-MES-CFR.pdf Please feel free to communicate with us through the channels below if you have additional questions. 1. Facebook Messenger: http://m.me/samsungsupport 2. Twitter: https://twitter.com/messages/compose?recipient_id=18768513 3. Samsung Community: https://us.community.samsung.com/t5/Samsung-Community/ct-p/us Your reference number: 1144443167 Leo
Sorry, there was a problem. Please try again later.It is hard wired and no plug. It requires a 50 amp breaker which also means you need a 6 gauge wire at least. You may therefore need to pull a bigger wire to accommodate this oven.
Sorry, there was a problem. Please try again later.It requires a 40 amp breaker. It is hard wired, not plugged in.
Sorry, there was a problem. Please try again later.The model NV51K7770DG/AA requires a 50 amp circuit. It is hardwired into a junction box in the top right corner of the cabinet behind the oven.
Sorry, there was a problem. Please try again later.Wall ovens require hard-wire 240 and cannot be installed with receptacles by code... but you'll save since there is no sales tax when installing in your home.
Sorry, there was a problem. Please try again later.The manual says to connect to a 50 amp breaker, but it only draws 40 amps. I have mine connected to the existing 40 amp line and it's never tripped the circuit. The unit doesn't have a cord, you wire it directly into a junction box. If you have an outlet there, you could install a plug on the connection pigtail, but it would be just as easy to wire it into the box.
Sorry, there was a problem. Please try again later.I used a 45 AMP. No plug on this system. It gets hardwired through a junction box.
Sorry, there was a problem. Please try again later.It requires a 50 amp circuit breaker and I have asked the same question. I have yet to receive an answer also. Sorry, Ed
Sorry, there was a problem. Please try again later.