“I have 2 wall mounts and none of the screws fit the back of tv,anyone else have this issue?”
Answer This Question
1-6 of 6 Answers
You need to get M8 screws. I had the same problem and called Samsung. They told me to get M4 but they were wrong as I bought them and they were too small. I found in the TV manual it requires M8 screws. These are metric so be sure to get that kind. When you install them they may not fit through your mount holes. My son had to drill mine a little larger. Also you need to use the black round spacers that came with the TV as the screws don't screw in all the way. I realized this after finally getting it mounted and couldn't figure out why the screws were sticking out. I hope this helps. It was a hassle to get this TV mounted but I am very pleased with the TV itself.
Sorry, there was a problem. Please try again later.yes my tv did not come with any of the screws for wall mounting as well. I was able to locate some in the garage that fit.
Sorry, there was a problem. Please try again later.Yes, I had same problem. Had to use short spacers, that came with separate wall bracket. Went to hardware store and got a bag of small flat washers (5/16 hole). I then stacked 4-5 per screw between spacers supplied and wall mount bracket as a standoff.
Sorry, there was a problem. Please try again later.I had this problem but my TV cane with little circle adapters to make it work with a wall mount stand.
Sorry, there was a problem. Please try again later.Service at best buy usually has suggestions of wall mounts that will work. They helped me find the correct size for my tv.
Sorry, there was a problem. Please try again later.The mount I used (Insignia Fixed Position) had the same issue. I used two different screw sets on the top and bottom. It works but if you're using a fixed position mount it is a little more difficult as the HDMI/Component/etc. ports are going to be pressed against the wall.
Sorry, there was a problem. Please try again later.