“Ok I bought this sound system. Is it already to go out of the box or do you need to adjust the sound to the back speakers? So not all the sound is coming from the sound bar?”
Answer This Question
1-5 of 5 Answers
Hi Joblue, You can manually optimize your audio experience by pressing the SOUND CONTROL button (which looks like a gear) to access the setting items such as TREBLE, BASS, SYNC, CENTER LEVEL, SIDE LEVEL, FRONT TOP LEVEL, REAR LEVEL, REAR TOP LEVEL, and VIRTUAL ON/OFF. The selected item can be adjusted using the Up/Down buttons. – To control the volume of the treble or bass sound, select TREBLE or BASS in Sound Settings, and then adjust the volume between -6 to +6 by using the Up/Down buttons. – Press and hold the SOUND CONTROL button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the Left/Right buttons and each can be adjusted to a setting between -6 to +6 using the Up/Down buttons. (Make sure the Sound mode is set to “STANDARD”.) – To control the volume of each speaker, select CENTER LEVEL, SIDE LEVEL, or FRONT TOP LEVEL in Sound Settings, and then adjust the volume between -6 to +6 by using the Up/Down buttons. – If the video on the TV and audio from the Soundbar is not synchronized, select SYNC in Sound Control, and then set the audio delay between 0~300 milliseconds by using the Up/Down buttons. – SYNC is only supported for some functions. – If Surround Speakers are connected, select REAR LEVEL and then use the Up/Down buttons to adjust the volume within a -6 to +6 range. – The VIRTUAL Speaker function can be turned ON/OFF by using the Up/Down buttons. ^Andrew
Sorry, there was a problem. Please try again later.You have to connect the sub and the rear speaker amplifier to power as you do the soundbar, The critical aspect of the instal is that the soundbar's control panel is facing upward towards the ceiling so everything will connect wirelessly.
Sorry, there was a problem. Please try again later.How you configure things is all your personal preference… as far as “all the sound coming from the sound bar “… that is not going to happen regardless. If you have the rear kit, they will play sound, simple as that. If you want to turn up the rear Chanel levels, you can do so with the remote or the smart things app.
Sorry, there was a problem. Please try again later.I found it ready to go, basically, out of the box. If you follow the setup instructions, you should have no issue. I'm assuming you have a Samsung TV. If so, I selected the soundbar via the Sound Output settings, and I selected "adaptive" and the systems decides the mode based on the source. So far, it has done an excellent job. HDR/UHD movies sound amazing. The effects are incredible.
Sorry, there was a problem. Please try again later.DO NOT use the UP/DOWN buttons to adjust the volume within a -6 to +6 range!!! DO use the WOOFER button to adjust the volume within a -6 to +6 range.
Sorry, there was a problem. Please try again later.