1-3 of 3 Answers
New configuration, profile rts, brightness 100, contrast 75 to 100(personsal preference) color neutral/normal, gamma mode 1 ( or test to your liking) black equalizer @ 13 to 16 again can lower as needed to drop black darkness this will make whites on webpages look white nice color profile Sharpness id lower to 60
Sorry, there was a problem. Please try again later.100 percent brightness, 75 to 100 for contrast, you can qdjist the black qualizer to your liking that will lift blacks
Sorry, there was a problem. Please try again later.Yes you'll need to do two things. First you need to make sure you have the current firmware updated. To do that you need USB thumb drive for bad the FAT32 and you'll need to use the USB cable that came with the monitor and connect it to your computer just like a printer. Then you must first turn off the computer and then turn it back on and then plug in the USB device. Using the OSD go to I think it's support and choose firmware upgrade and it will auto update. Do not turn off the monitor until it has completed it's update you'll know this when the marger shuts off on his own and then it will turn itself back on. Remove the Sun Drive and if you don't need the USB cable you can remove that too then unplug the power cord then reconnect the power cord and you're good to go on the firmware. 17 minute point this video will give you the calibration settings that seem to be really good for this monitor. https://youtu.be/go1qsBetgV0
Sorry, there was a problem. Please try again later.
