“I have an epson 3000 projector that is supposedly 14.9 lbs, and this shelf holds up to 15 lbs. makes the shelf bend down a bit, but seems to be ok at this point. Should I be worried?”
Answer This Question
1-5 of 5 Answers
It sounds like there is a mounting issue. The glass shelf can't bend so I would look at improving your mounting method. Try mounting unit on a stud in your wall, if that is not possible use a better hollow wall anchor If this is not the issue then look to the way the glass is inserted into the bracket. Make sure it's correctly and fully seated
Sorry, there was a problem. Please try again later.not a good a thing - safety wise
Sorry, there was a problem. Please try again later.If the shelf does not have anything else but the projector and it is slightly bent down. You will need to make sure that all the clamps holding the glass were screwed tightly without cracking the glass along with the screws in the wall holding the base is actually screwed in an actual bean behind the wall. It should not bend at all.
Sorry, there was a problem. Please try again later.I would recommend reinforcing the wall mount and underside of the glass to be more stable so it sites more flat. At the moment you run the risk of it gradually coming loose from the screws holding the glass on. Vibrations and what not will have a toll on it after a while. Better safe than sorry, lol.
Sorry, there was a problem. Please try again later.Good Day, No, you shouldn't be worried as long as the shelf was assembled correctly. Make sure the projector isn't hanging over the edge of the shelf at all and you are good to go. Please let us know if you need anything else. Thanks! Jake @ SANUS
Sorry, there was a problem. Please try again later.