A:AnswerHey MelMar,
Thanks for the question. It should work with your specific projector. This mount is rated to hold up to 50 lbs so as long as it is under that it should be compatible.
Thanks,
- Haydn @ SANUS
A:AnswerAloha SP,
As long as your projector is under the 50lb weight limit you should be good to go! Feel free to call us at 800-359-5520 if you need any more details. We're standing by 7 days a week to help you out!
Kathryn @SANUS
A:AnswerHello,
To make sure this will work with your projector, please give us a call at 800-359-5520 and we will triple check for you! We're here 7 days a week til 7pm CST!
Kathryn @SANUS
A:AnswerHello, This should work with your projector but to triple check, please call us at 800-359-5520. We are here 7 days a week til 7pm CST and can help you out!
Kathryn @SANUS
A:AnswerI just bought and installed it on the BenQ 2050. Only thing I had to do was take one of the bracket arms off because the projector only had 3 places for the mount and not 4. Not an issue for me. BTW, the 2050 is amazing and I am incredibly impressed with the quality of the picture. May want to look at it
A:AnswerGood Day,
Our projector mounts are meant to be universal and this should work with your Epson 3500 projector. I would give our Customer Care team a ring @ 800-359-5520 to check for sure. Please let us know if you need anything else.
Cheers,
Jake @ SANUS
A:AnswerThat is a crazy heavy projector you have. It is one solid mount but I can't speak for exact specs. Prob reliant on your anchoring but the mounts on the projector could still be vulnerable. Good luck.
A:AnswerAlthough I suspect that you have already resolved this the web site asked if I could answer the question so I thought I'd post it. The VMPR1S will work with the 8350 I just set this up myself. Not sure about the other one though. The only thing is, if the manual in the box leaves you scratching your head you can download a better one from Sanus's web site. What I downloaded may come in the box but mine did not have good instruction just some basic drawings and a very short note on how it should be assembled. Also watch for the projector alignment screw heads stripping. On mine they were very hard to tighten. I had read a review somewhere of someone else having the same issue and they replaced the #10 phillips head screws with some # 10 hex head screws which you can get at any hardware store. They worked great.
A:AnswerThe spider configuration of the mounting arms seem like they will accommodate any configuration. My Epson had three holes, and it worked perfectly.
A:AnswerThere are 3 mounting holes on the bottom of the projector in the shape of a triangle. The distance from the top hole to each bottom hole is 6 and 3/4 inches center to center. The distance between both bottom holes is 6 and 3/8 inches center to center. The operator's manual suggest that you use the PSS-610 Projector Suspension Support from Sony. This comes at a price of $300.
