Black Friday is hereShop new DoorbustersShop now

Skip to content
Gift Ideas
26 Cypress St
Williston, VT 05495
Opens tomorrow at 9 am
Find Another Store
Main Content

Questions & Answers

Your price for this item is $109.99
The comparable value price is $129.99
Page Showing 1-20 of 27 questions
  • QuestionCan I adjust the microphone's sensitivity remotely?

    • Answer Yes, the transmitters offer a 17-step remote gain control, allowing you to fine-tune the microphone's sensitivity according to your needs.
    This question and answer was generated by AI based on customer and product data.
  • QuestionDoes this microphone system have any noise reduction capabilities?

    • Answer Yes, the Saramonic Blink 500 B2+ is equipped with a two-stage active noise-canceling feature to ensure clear audio recording.
    This question and answer was generated by AI based on customer and product data.
  • QuestionIs this microphone system compatible with smartphones?

    • Answer Yes, the Saramonic Blink 500 B2+ is compatible with iPhones, iPads, and Android devices.
    This question and answer was generated by AI based on customer and product data.
  • QuestionHow long can I use the microphone system on a single charge?

    • Answer The transmitters provide a runtime of up to 20 hours, while the receiver offers up to 16 hours of continuous use.
    This question and answer was generated by AI based on customer and product data.
  • QuestionWhat is the maximum operating range of this wireless microphone system?

    • Answer The Saramonic Blink 500 B2+ offers an impressive operating range of up to 492.1 feet (150 meters).
    This question and answer was generated by AI based on customer and product data.
  • QuestionWill this work with a windows laptop on the receiving end, or does it only do mobile devices?

    Asked by Jerms.

    • Answer Absolutely. You can plug the receiver into your laptop with the included USB-C adapter and record in mono or stereo. Mono for a single microphone or if you want 2x mics to come through both left and right channels, and Stereo if you want to record each mic individually to a application.

      Answered by JDEAN

  • Questioncould i buy 2 kits and connect all 4 microphones to 1 channel ?

    Asked by connectivity.

    • Answer You could buy 2x kits and use an Y-adapter into your camera, like the Best Buy essentials - 6" 2-Way Audio Splitter - SKU:6458773 https://www.bestbuy.com/site/best-buy-essentials-6-2-way-audio-splitter-black/6458773.p?skuId=6458773 The receivers' TRS output cable would plug into the Y-adapter, then in to your camera. You can not have more than 2x tranmitters into 1x receiver. I hope that helps.

      Answered by JDEAN

  • Questioncan i stream with these microphones?

    Asked by Jose.

    • Answer Absolutely. You can stream to computers using the USB-C output on the receiver, or you can stream using Smartphones or Tablets, using either the Lightning or USB-C output. Make sure you have the receiver in mono mode, so both microphones will be heard through the left and right side, stereo will split one to the left and one to the right.

      Answered by JDEAN

  • QuestionIs there a magnet to a touch the microphone to clothing instead of using the clip?

    Asked by Eaglestare.

    • Answer Yes, each mic transmitter includes a magnetic mount.

      Answered by JDEAN

  • QuestionAre there two separate audio feeds? One for each microphone ?

    Asked by Anonymous.

    • Answer Yea

      Answered by JpS1

  • QuestionCan I use this for a church to speak with out wired mic

    Asked by Johnny.

    • Answer You could plug the receiver into your church's mixer or PA and transmit wirelessly. You will need the proper adapter for the mixer, this adapter is likely what you will need: Best Buy SKU: 10126938 https://www.bestbuy.com/product/lyxpro-3-5mm-trs-to-dual-xlr-male-audio-cable-y-audio-splitter-adapter-cable-6-feet-white/J39HJS6SGQ You should keep the receiver line-of-sight for the best results.

      Answered by JDEAN

  • QuestionDo these work with a cannon camera?

    Asked by Rachel.

    • Answer Yes, if you camera has a 3.5mm mic input. Most Canon cameras have a mic input, but it is worth checking for sure. If you'd like to ask a second question with the Canon camera model number, I can check for you.

      Answered by JDEAN

  • QuestionDo the wireless transmitters have a 3.5mm jack to plug a lavalier mic into them so you can clip the bulky mic in a belt?

    Asked by PM.

    • Answer Not on the B2+, but the Saramonic Air does include lavaliers and the transmitters are even smaller. It is a big upgrade in features for a small bump in price. https://www.bestbuy.com/product/saramonic-air-2-person-mini-wireless-clip-on-mic-system-w-lavaliers-for-cameras-mobile-devices-computers-black/CZWXZJ3628

      Answered by JDEAN

  • QuestionAre they Waterproof?

    Asked by Anonymous.

    • Answer No, they are not. For water resistant transmitters, you can check out the Saramonic Ultra. The transmitters are IPX water resistant. https://www.bestbuy.com/product/saramonic-ultra-2-person-universal-wireless-mic-w-32-bit-float-recording-black/CZWXZJ3SQR

      Answered by JDEAN

  • QuestionWhat is the range of microphone?

    Asked by Hello.

    • Answer 492.1' (150m) Line-of-Sight. You can expect about 100' in most normal scenarios.

      Answered by JDEAN

  • QuestionWill this work with a Minolta MN4KPRO camcorder?

    Asked by Anonymous.

    • Answer Yes, you can plug the Blink 500 B2+'s receiver into the camera's 3.5mm mic input using the included 3.5mm TRS cable.

      Answered by JDEAN

  • QuestionWill this microphone work with a harbinger speaker system?

    Asked by Artlady.

    • Answer Yes. Depending on which harbinger speaker system you have the inputs vary. But most have a 3.5mm input and you can use the included 3.5mm TRS cable to connect. If your system does not have the 3.5mm input, you can get an 3.5mm to XLR male adapter to connect it.

      Answered by JDEAN

  • QuestionIs this suitable for a person giving a horse demonstration in an outdoor arena and compatible with a wireless battery operated Bluetooth speaker system - all outdoors

    Asked by Anonymous.

    • Answer If your Bluetooth speaker has a physical Aux Input, it will work. But it will not connect via Bluetooth to that speaker. Check the back of the Bluetooth speaker and see if it has an auxiliary input, usually they are 3.5mm. If it does, then you can certainly plug the receiver of the B2+ into the speaker using the included 3.5mm cable. You also want to make sure that you do not have the microphone(s) directly in front of the speaker or you will get feedback. It is always best to be behind the speakers to avoid feedback.

      Answered by JDEAN

  • QuestionCan this mic work with Insta360 X5?

    Asked by Fil.

    • Answer Yes, but you will need the Insta360 Microphone Adapter for X5. I don't see this product listed on BestBuy.com, but it is available at many other Insta360 dealers or on Insta360's website: https://store.insta360.com/product/x5-mic-adapter

      Answered by JDEAN

  • QuestionIs this compatible with the CapCut app? Can I record audio from these microphones in CapCut?

    Asked by Dawg.

    • Answer Yes. You can use external mics with CapCut. Please refer to CapCut's instructions on how to use external microphones and you can use this system with the app.

      Answered by JDEAN