“I bought the kit Model:RK56S30 to install with my SMC2242DS. The inside height is more than the height of the microwave 13.8 inches.Do I need this flush mount kit in order to completely enclose the oven? With the kit installed, there is a gap at the top.”

Asked by EliSJ 5 years ago

1-2 of 2 Answers

I did not snap the outer frame into the inner frame as I saw that there was a gap between the top of the oven and the inner top edge of the outer frame. Once snapped in, I found it was quite difficult to snap back in if I do not exert a lot of force. I measured the inner height and found it larger than the height of the oven. Hence it will not flush in nicely.
Answered by EliSJ 5 years ago
Sorry, there was a problem. Please try again later.
Hello, the space on the inside of the Trim Kit is used for the unit to ventilate. The Trim Kit comes with an inner frame and an outer frame. With the outer frame, there should be no gap.
Answered by Sharp Advisor 5 years ago
Sorry, there was a problem. Please try again later.