A:AnswerHello TaylorG! We recommend to take in consideration the mounting dimensions and weight to make sure that it will fit in the available space of your vehicle: Approx. 182 mm × 53 mm × 160 mm(7 1/4 in × 2 1/8 in × 6 5/16 in) (w/h/d) and Mass: Approx. 1.2 kg (2 lb 11 oz).~Jeannette
A:AnswerHi Kompressor,
Here are the dimensions of this stereo.
Approx. 178 mm × 50 mm × 177 mm
(7 1/8 in × 2 in × 7 in) (w/h/d)
Mounting dimensions:
Approx. 182 mm × 53 mm × 160 mm
(7 1/4 in × 2 1/8 in × 6 5/16 in) (w/h/d).
Please check the slot in your vehicle. You may also check the Connections and Installations in the link below for further assistance.
https://docs.sony.com/release//MEXN5100BT_N4100BT.pdf
Thanks,
>Joffrey
A:AnswerHi Golferinsun,
Please check the connections supported by this stereo in the link below.
https://docs.sony.com/release//MEXN5100BT_N4100BT.pdf
Thanks,
>Joffrey
A:AnswerIt should if you have an aftermarket radio already installed you should be set . If not you would be required to purchase a wire harness and dash kit.
A:AnswerHi 356tub,
Please check the Installations and Connections of this stereo in the link below.
https://docs.sony.com/release//MEXN5100BT_N4100BT.pdf
Thanks,
>Joffrey
A:AnswerHi deacdan,
Here are the dimensions of this stereo.
Approx. 178 mm × 50 mm × 177 mm
(7 1/8 in × 2 in × 7 in) (w/h/d)
Mounting dimensions:
Approx. 182 mm × 53 mm × 160 mm
(7 1/4 in × 2 1/8 in × 6 5/16 in) (w/h/d).
Please check the slot in your vehicle.
Thanks,
>Joffrey
A:AnswerHi Humbi, This Sony MEXN5100BT is a standard single din stereo head with an approximate dimension of 178 mm × 50 mm × 177 mm (7 1/8 in × 2 in × 7 in) (w/h/d). Mounting dimension is 182 mm × 53 mm × 160 mm (7 1/4 in × 2 1/8 in × 6 5/16 in) (w/h/d). You may check the dash board of your 2008 Saturn Astra if it supports this kind of mounting dimensions. «Jerome
A:AnswerHi there, We highly recommend using the supplied parts for installation and connections. It is also recommended that you check if your car is compatible with standard single din stereo head with mounting dimension of Approx. 182 mm × 53 mm × 160 mm (7 1/4 in × 2 1/8 in × 6 5/16 in) (w/h/d) «Jerome
A:AnswerHi AJ, This Sony MEXN5100BT is a standard single din stereo head with an approximate dimension of 178 mm × 50 mm × 177 mm (w/h/d). Mounting dimension is 182 mm × 53 mm × 160 mm (w/h/d). You may check the dash board of your 2005 Camry if it supports this kind of mounting dimensions. «Jerome
A:AnswerI would encourage you to visit a Best Buy store to speak with a tech in the Car Installation bay for specific details. A tech should be able to determine whether or not this receiver is compatible with your vehicle.
Thanks!
A:AnswerHi bryaniw, This Sony MEXN5100BT is a standard single din stereo head with an approximate dimension of 178 mm × 50 mm × 177 mm (w/h/d). Mounting dimension is 182 mm × 53 mm × 160 mm (w/h/d). You may check the dash board of your 2000 Mazda 626 if it supports this kind of mounting dimensions. «Jerome
A:AnswerHello Lee, thank you for your message. Car Stereo Dimensions: Approx. 178 mm × 50 mm × 177 mm (7 1/8 in × 2 in × 7 in) (w/h/d). For more information, check the link below: http://146.215.230.18/release/MEXN5100BT_N4100BT.pdf. -Oscar.
A:AnswerYes it will. Fits perfect in my 97 xj. Tjs and xjs have similar wiring and interiors so it will work, but it does require a cheap installation kit to make it work.
A:AnswerHere are the dimensions of this stereo.
Approx. 178 mm × 50 mm × 177 mm
(7 1/8 in × 2 in × 7 in) (w/h/d)
Mounting dimensions:
Approx. 182 mm × 53 mm × 160 mm
(7 1/4 in × 2 1/8 in × 6 5/16 in) (w/h/d)
Please check the slot in your vehicle.
Thanks,
>Joffrey
A:AnswerHi Maggie, The Sony MEXN5100BT is a standard single din stereo head. Here are the dimensions: (approx.) 178 mm × 50 mm × 177 mm (7 1/8 in × 2 in × 7 in) (w/h/d). Mounting dimensions: (approx.) 182 mm × 53 mm × 160 mm (7 1/4 in × 2 1/8 in × 6 5/16 in) (w/h/d).
Please check this link for wiring harness connection (page 33):
https://docs.sony.com/release/MEXN5100BT_N4100BT.pdf
You may have to check if the dashboard of your car supports these specifications. -Anthony
A:AnswerHi RonB! You can check this link to see if the supplied wiring harness of the MEXN5100BT is as same as your current wiring harness (page 33):
https://docs.sony.com/release/MEXN5100BT_N4100BT.pdf
-Anthony
A:AnswerYep! I have a 99 Chevy s10 which is basically identical to your truck and it fits in mine, you do need to buy an single din adapter since ours is a 1.5 din.
