1-1 of 1 Answer
Hi DLA, Thank you for purchasing the HT-Z9F. Unfortunately no, the HT-Z9F are active soundbar that has a built-in surround sound processor that acts as a receiver and amplifier. This mean that a soundbar is self contained and does not need any extra hardware to properly function and process sound. We'd love to troubleshoot and isolate the issue. If the TV sound from this system lags behind the image. Set the adjustment value of the delay between the picture and sound to 0 msec if it is set to the range between 25 msec and 300 msec. A time gap between the sound and picture may occur depending on the sound source. If your TV has a function that delays the image, use it for adjustment. The sound is delayed behind the picture when using the wireless multi room function. When the sound of the [TV] (including the connection with the BLUETOOTH function), [HDMI1], [HDMI2],[Bluetooth Audio], or [Analog] input is played in the wireless multi room function, the sound of the system is delayed behind the picture to synchronize with the sound of other speakers. If you are bothered by the time gap between the sound and picture, try the following. • For the HDMI1 or HDMI2 input: Press OPTIONS and set [Multi-room Sync] to [Off]. • For the TV or analog input: Press OPTIONS, up/down until “MSYNC” appears on the front panel display, and (enter), then press / until “OFF” appears on the front panel display and press (enter). The sound of the system is synchronized with the picture though the sound output from other speakers is delayed. Please open the manual on this link for reference. page 71-72: https://www.sony.com/electronics/support/res/manuals/4727/d3668cdaf4f83107b52ee9bdb84fa5a0/47275331M.pdf I hope this helps. If you are unable to resolve your concern, please email us at [email protected] with the following details: Name: Bestbuy Username: Model Number: Issue: Telephone Number: Regards, Kris
Sorry, there was a problem. Please try again later.
