1-4 of 4 Answers
Hi, this is from the official reference guide: "Power source: DC 5 V: When charged using USB." "USB AC adaptor: A commercially available USB AC adaptor capable of supplying an output current of 1.5 A or more." You need a charger that can output 5V with at least 1.5A. 5V * 1.5A = 7.5W. So the answer is: at least 7.5 W. I think any PD (Power Delivery) charger with 5V/3A works. Note: 5V/3A on a charger means: 5V with "at most 3A". The current will be decided automatically by themselves. (The voltage 5V is fixed though.) If you have a Thunderbolt 3 port on your computer, it will work as well. (Thunderbolt 3 supports 5V/3A output.) You will need a USB-C to USB-C charging cable. Other voltage level like 9V, 12V, 15V, 20V will not be activated. Don't worry.
Sorry, there was a problem. Please try again later.I use a 5Watts 2AMP charger
Sorry, there was a problem. Please try again later.There's no quick charging per se. However, going by typical 5v lines, Sony recommends a minimum of 1.5a. So if your charger can output 5v at 2 to 3 amp, then you may be fine. I wish Sony would publish their electrical input limit, or whether or not the headphone could handle a USB-PD source.
Sorry, there was a problem. Please try again later.I don't think it is a matter of wattage, it is just the way the Li-Ion batteries work. They are much easier to fill up when they are empty then they are when they are above 80%. I have an electric car and I can get the first 150 miles on in just a few hours but it takes a lot more time to tack on the final 100. It is almost like you need more pressure to shove in those remaining electrons in all the empty spaces.
Sorry, there was a problem. Please try again later.
