A:AnswerUnboxing a speaker can be an exciting experience! Here are some general steps to help you unbox your new speaker safely:
1. Prepare Your Workspace:
Find a clean, flat surface to work on.
Ensure you have enough space to lay out all the components.
2. Inspect the Box:
Check the box for any visible damage that might have occurred during shipping.
Make sure you have the correct model.
3. Open the Box:
Use a box cutter or scissors to carefully cut any tape or seals. Be cautious not to cut too deep to avoid damaging the contents inside.
4. Remove the Packing Materials:
Open the flaps of the box and gently pull out any packing materials like foam or cardboard inserts.
Keep these materials in case you need to return the product or move it in the future.
5. Take Out the Speaker:
Carefully lift the speaker out of the box. It might be wrapped in protective plastic or foam.
If the speaker is heavy, consider asking for help to avoid dropping it.
6. Unwrap the Speaker:
Remove any plastic wrap, foam, or other protective materials from the speaker.
Be gentle to avoid scratching or damaging the surface.
7. Check for Accessories:
Look inside the box for any additional items such as power cables, remote controls, user manuals, or other accessories.
Lay them out on your workspace.
8. Read the Manual:
Before setting up the speaker, take a few minutes to read the user manual. It will provide important information about setup, usage, and safety precautions.
9. Inspect the Speaker:
Check the speaker for any visible damage or defects.
Ensure all buttons, ports, and connectors are intact and functional.
10. Setup:
Follow the instructions in the user manual to set up and connect your speaker to your audio source.
By following these steps, you can ensure that your speaker is unboxed safely and is ready for use. Enjoy your new audio experience!
A:AnswerThank you for reaching out to us.
I'm very sorry to say that we are not sure when it will be available at BestBuy. Please do keep your eyes on the listing.
Sorry for the disappointment, and thank you for your understanding.
A:AnswerThank you so much for sharing your experience. We're really sorry you've encountered this issue!
If possible, please try the following steps to see if the issue persists:
1. Hold both the "Bluetooth " and "Volume+ " buttons for 8 seconds to reset
2. Try to use another DC adapter(if possible) to charge the Rave Party 2. The DC adapter should have power of at least 5V/2A.
If those don't help, please reach out to us via [email protected] or call us at +1 (800) 988 7973. We are more than happy to assist you further.
We offer an 18-month warranty for this product, plus lifetime technical support. Our standard for responding to email quests is less than 24 hours, and we look forward to hearing from you!
