A:AnswerThe capacity of each shelf is listed in the literature that came with the unit. If memory serves correctly, 135 lbs for the top shelf and 50 lbs for the middle and bottom shelves.
A:AnswerHi Mitzy, thank you for your interest. The swivel mount lets you pan up to 45° left and right; there is no tilt feature (up/down) for this model.
A:AnswerHi Bray. We do not recommend mounting anything larger/heavier than what it is stated on the assembly instructions. This TV console was only tested to hold up to most 65" Flat Panel TV's with a maximum weight load of 135 lbs.
A:AnswerOn the back of your TV, there should be a series of screw holes in a square pattern.
The brackets that came with this stand would screw into those holes, usually anywhere between 100x100mm to 400x400mm.
Once you got those on the back of the TV, you just hang it on the mount, either on the wall or on the pole.
Its been a few days, so I am sure you got it already, but if not YouTube is your friend! :)
A:AnswerHi Burkey. This item includes a TV Mounting Kit with some of the most commonly used bolts/spacers needed for installation. Please contact Customer Service at 1-866-942-5362 if you need further assistance.
A:AnswerHi Fiona. It might not be, it all depends on the actual width of the TV. The mounting frame is approximately 32 inches wide. Please contact us at 1-866-942-5362 if you need further assistance.
A:AnswerUnfortunately, no; we do not recommend using this console with larger/heavier TV's than the recommended 65" Flat Panel and maximum weight load of 135 lbs.
A:AnswerThe overall height is 55.75 inches to the tip of the monitor brackets; the height in between the shelves is 8.78 inches. Please contact us at 1-866-942-5362 if you have any further questions.
A:AnswerHi Ktahtinen. The overall dimensions are 54" W x 21" D x 22" H (console only) / 55.75" H (Swinging Floater option). The height between the shelves is 8.78 inches and they measure 47.6 " W x 18.43" D. We hope this meets your needs!
A:AnswerHello Tweetyx2012. The TV mount should be included with this 3-in-1 model; please contact Customer Service at 1-866-942-5362 to obtain more information and assist you further.
A:AnswerHi Steph, the mounting frame is approximately 32 inches wide and the monitor brackets have an overall height of approximately 20 inches. It will accommodate even some 32" TV's (measured diagonally).
A:AnswerIt will hold it if sitting on table not mounted to the back of stand. However, product guidelines state up to 65” so anything more is considered breaking those guidelines set by the manufacturer
