“I understand the freezer is 32" deep. Does it have a removelable handle and if so, is the depth less than 32" with handle removed?”
Answer This Question
1-3 of 3 Answers
The freezer has been delivered. I can actually answer my own question to help others know if it will fit thru a 32" door way. The answer is YES. The freezer chassis is only 27" deep. The hinges on the back side are removable, however the manual says if you must remove them, contact tech support. If you remove the hinges, (lid), they are concerned about the seal. The hinges add 1 3/4" to the depth. The front handle also appears to be removable, but I did not confirm it because was it not necessary. The front handle assembly and lock add another 1 5/8" to the total depth. Chassis (27"), hinges (1 3/4") and handle (1 5/8") total 30 3/8. I double checked the inside measurements to make sure I had a 14 plus cubic foot freezer I do. I did not subtract for the small housing inside the cavity of the freezer that holds shields the inside from the compressor, but it would still be right around 14 cubic feet. I hope this helps anyone else shopping for this freezer. The advertised dimensions are misleading.
Sorry, there was a problem. Please try again later.Hi Outlaw. Unfortunately, the handle is not removable. We are sorry for any inconveniences this may cause you.
Sorry, there was a problem. Please try again later.Just got ours in and can confirm this- with the additional note that ours came with the handle not installed which made things a lot easier.
Sorry, there was a problem. Please try again later.