“The ice maker stopped working.What do I need to do to look at”
Answer This Question
1-1 of 1 Answer
Thank you for sharing your experience. We regret that you are encountering an issue with your refrigerator's ice maker. Please review the following professional troubleshooting tips: Ice Maker Troubleshooting Is the Ice Maker Turned On? Freezer Models (Style 1): The ON/OFF switch is located on the underside of the ice maker (""o"" is OFF, and ""-"" is ON). Refrigerator Models (Style 2): On the display, select Settings > scroll to Tools/Set Up > select Ice Maker to check the status. https://youtu.be/hTT6MSHfhqY Does the Ice Maker Need to be Reset? For models with the ice maker in the freezer section, a reset button is on the underside. Cycle power to the Ice Maker (turn it off, then back on). Hold the test button with your finger or a pencil eraser for 5 seconds to begin the test cycle. https://youtu.be/jiJ5Hw4lmGM Water Supply and Lines The refrigerator requires installation to a cold water supply. Use 1/4"" (6.35 mm) O.D. soft copper or PEX tubing for connection, and leave a service loop for maintenance. Check for kinks in the water supply line, which can reduce flow. Straighten the line to restore pressure and avoid pushing the refrigerator too far against the wall or cabinet, which could pinch the line. https://youtu.be/22Ee78VfBdE Water Filter Replacement A clogged or incorrectly installed water filter can restrict water flow to the ice maker and dispenser, resulting in low ice production and slowed water flow. It is recommended that the Whirlpool water filter be replaced every 6 months, when the indicator light comes on, or as needed. Whirlpool recommends using everydrop® water filters. https://youtu.be/LIP-Za8XnzU If these steps do not resolve your concerns, we would recommend contacting Whirlpool® at 800-253-1301. We are available M -F 8 am to 6 pm EST. They will be better able to assist you.
Sorry, there was a problem. Please try again later.