1-1 of 1 Answer
Regarding your inquiry about the location requirements for the Whirlpool® washer model WTW4307SW, proper installation is essential for optimal performance, minimizing noise, and preventing "washer walk." You will need to select an appropriate location, such as a basement, laundry room, closet, or recessed area. Important Requirements: Environmental Conditions: Do not install, store, or operate the washer where it will be exposed to weather or temperatures below 32°F (0°C). Water Supply: Hot and cold water faucets must be located within 3 ft (0.9 m) of the washer's fill valves, with water pressure between 20–100 psi (138–690 kPa). The water heater must be set to 120°F (49°C). Electrical Supply: A grounded electrical outlet is required within 4 ft (1.2 m) of the power cord on the back of the washer. Flooring: The floor must be level, with a maximum slope of 1" (25 mm) under the entire washer. Installation on carpet or surfaces with foam backing is not recommended. The floor must be capable of supporting the washer's total weight (with water and a load) of 315 lbs (143 kgs). Thank you for your interest in our Whirlpool® appliances.
Sorry, there was a problem. Please try again later.