A:AnswerHi Tom,please find the dimensions below in inches.Thank you for your inquiry on our Whirlpool appliances.
Depth 31 9/16
Width 27
Minimum Height 38 5/8
A:AnswerLike most (all?) front loaders, this machine has a fast final spin to wring most water out of the clothes. This can press the clothes to the sides of the drum. Not sure what stuck means though. The clothes are easy enough to remove and don't seem to be damaged in any way.
A:AnswerHello User, this Washer does not have a Delay Start. Hopefully this information is beneficial to you. Thank you for your inquiry regarding our Whirlpool appliances!
A:AnswerBob, the dimensions for model WFW5620HW Washer is: depth with door open 90 degree 56 1/2", depth 31 9/16", height 38 5/8", minimum height 38 5/8:, and width 27".
A:AnswerHello! Bleach is placed in the compartment marked "Bleach", in the top right corner of the dispenser. Hopefully, this information is beneficial to you. Thank you for your inquiry regarding our Whirlpool Appliances!
A:AnswerHello Brad! We are terribly sorry to hear about your concern. We would recommend contacting Whirlpool® at 800-253-1301. We are available weekdays, between 8 am to 8 pm EST. They will be better able to assist you.
A:AnswerHello Missy69! We are terribly sorry to hear about your concern. We would recommend contacting Whirlpool® at 800-253-1301. We are available weekdays, between 8 am to 8 pm EST. They will be better able to assist you.
A:AnswerBlondy, yes, there is an access panel at the bottom of this Washer. Hopefully, this information is beneficial to you. Thank you for your inquiry regarding our Whirlpool Appliances!
A:AnswerHi Soapless. We are sorry for any frustrations that you have experienced. Please call us at 1-800-253-1301 at your earliest convenience. We are open Monday through Friday from 8:00 am-8:00 pm EST.
A:AnswerMitch, mine did, but the model number you gave is for the washer. If you pull out the drawer of your pedestal, there will be a pedestal model number on a label on the side of the drawer. My model number was XHPC155XW1. According to both Whirlpool and Best Buy, it should not have worked - but it did! The front of the pedestal does not stick out as far as the correct (new) pedestal would have, but all the mounting holes and slots lined up perfectly and the drawer works fine. It just looks a bit different with the drawer front set back about an inch from the bottom front of the washer. If you don't mind the look, save yourself $250 and try the old pedestal before you buy a new one.
(If you really want to be sure, look up the dimensions of the old and new pedestals online (using the correct model numbers), and check the locations of the mounting holes and slots. That's what I did. Turns out that Whirlpool has not changed the hole/slot locations in many years, just the cosmetic look of the drawer fronts.)
