Customer Ratings & Reviews

Mounting a Cable Pass-through box like this, with one box low enough to be out of sight and the other box behind the middle of the wall mounted TV to be out of sight, is a good way to hide the clutter of Power, HDMI, LAN and USB cables to make the wall mounted TV seem to float on air. The trick is to do it with minimum damage to the dry wall and flexibility to pass different cables between the upper and lower box when new technology and cable types require cable replacement over the years. A traditional home/office electrical outlet box is designed to clamp cables or wiring firmly which makes wiring upgrades difficult and beyond DYI. As you read other reviews of these Legrand - In Wall Cable Access Plates you'll see that this is not the perfect solution out-of-the-box (so to speak). The directions included are typical of today's shabby instruction books, which are made primarily to satisfy legal government warning requirements in six languages (DO NOT eat parts of this box because they MAY present a choking hazard and they WILL cause cancer if you eat them in California). There are two things you need to know before installing these Legrand - In Wall Cable Access Plates. First DO NOT make the hole in the wall as big as you would for a standard electrical outlet box. This Wall Cable Access plate does not mount INTO an electrical outlet box. It has its own dog-legs that grip the back of the dry wall, to clamp itself into place when you insert it and then tighten the top and bottom clamping screws. You can see from the picture I uploaded, that I initially ASSUMED it needed the same sized hole as a standard outlet box, so I traced the outline of a standard outlet box on the wall to make the hole-saw cut in the dry wall. If I had proceeded with making that large a hole, the Legrand - In Wall Cable Access Plates would have wobbled around loosely without side support. Instead, trace the hole to be the size of the actual Legrand - In Wall Cable Access Plate. In the uploaded picture, I left off the final trim plate that comes with the box to let you see the size of the opening in the wall. When the included trim plate is installed, the total instalation looks much nicer. Secondly, to make the passing of new cables between the upper and lower box possible, TRIM THE EXCESS MATERIAL off of the Legrand - In Wall Cable Access Plate. Best Buy only allows a total of two pictures with each review, so I hope you can see what needed trimming from the boxes, by looking at the single before-and-after picture of the trimmed parts. I know the makers of this box designed it so cables could not fall in from the top box, to the area inside the wall, if the cables were not connected to the TV. However, all of this extra flange material makes installation of the new cables for the first time too difficult, to make the extra material worth it. All this being said, this kind of modification I'm describing is only an option for the Do It Yourself Home Owner. From inside the wall, it looks pretty rough when you trim it like this. Someone paying a professional installer would not be happy if they saw it. Professional installers or renters would have to go with a much more expensive and hard to install set of boxes. My method described is to make the cheaper alternative work. I dropped one review Star because of the typical lousy instruction manual and the trimming necessary to get the box to work the way I wanted it to. However, once I got everything in place, I am perfectly happy with the look and performance.

Easy to install. A little flimsy though, but you don't need them to be sturdy anyways. They look great once installed.

These wall plates were super easy to install even though the instructions were kind of confusing to look at. The plates work exactly as intended and don’t feel as flimsy as some of the others I have tried in the past.

I like these cable access plates because they make running wires look professional

Really nice find at Best Buy. I was hanging a new LG 4K TV in my living room and wanted to pretty up the existing installation. These plates (comes as a box of 2) beautiful cover up the wire pull through the wall. The "brush" middles cover up all but the wire coming out and are probably helpful in keeping down bugs and dust from within the wall. The install looks really professional and clean, like a hotel or conference room Definitely recommend.

These in-wall cable access plates did a good job for hiding the wires behind the wall so that they would not be visible. The instructions were not very detailed, but I was able to intuitively figure out how to use the cover plates. Use care because the plates could crack if excessive force is used.

We had our contractor install these when he mounted our tvs. These were great to make our installs look clean with no cables hanging.

Put one behind the tv and the other below so I could run the cables in the wall. They will work in a pinch but I have used much better ones that do not need as big of a hole cut in the wall and are more secure.

I used these in a new installation of my son's 65 inch TV, I installed them so I could run the HDMI and power cables from the back of the entertainment center to the space behind the TV. Easy installation.

This is exactly what we needed to install our new TV. It helped to hide all of the wires needed for installation.

They are great for hiding all the wiring. Good buy

Easy to install, cover up the cables instead of seeing the cables down the wall. Well worth the money.

This did a great job covering the holes i ran my cirds through. Great lrice too!!

Easy to install and looks great for hiding cables for the TV. Knocked off 1 star as one of the anchors that flips up as you screw it in broke, but expected for the price and material.

When you have allot of cables to hide this product looks great and gets the job done and looks neat. You do not see a bunch of cables from the wall, such as connecting outside cameras.

The product is great for doing exactly what it’s meant to do. Took 20mins to install, with no issues.

I love the look and I love the brush style opening on this product. You'll need some drywall cutting experience but hey if you don't have any the instructions are good enough to give you that very experience. I purchased this to run my TV connection cables in the wall and I am completely satisfied.

Works as it should, clean look. Sits pretty flush to the wall. Plenty of room for cords.

Works great, I needed a wall plate that would allow me to run all my wires behind the wall to keep it clean and this does the job. Highly recommend. Comes with both the top and bottom plates.

Simple to install and allows you to cleanly and easily pass cabling from one side of a wall to another or to run cable from one spot on a wall to another while keeping things out of site. This was the perfect solution for me to get HDMI output from one side of a partition wall to the other. Everything stays hidden and clean!