Customer Ratings & Reviews

Received and put together no problem. States that it fits 3 different type kegs, put in a 1/2 keg and the weight of the keg alone was too heavy for the door to function properly you had to lift the keg up a bit each time you wanted to close the door. The co2 regulator that came with the unit was absolute garbage. Finally took it in to the place that filled the tank for them to test it themselves and see why it wasn't reading properly, and well the reason it because that also was garbage. Had to purchase a new co2 regulator for $70. After 2 days of battling with the co2 pressure from a faulty regulator and putting the new one in, I actually had to double check to make sure it wasn't a piping hot oven I was dispensing the beer from cause thats about the temperature it felt like. 62 degrees on the coldest setting. I decided to put in call to nostalgia to ask them if they could tell me how to not burn my mouth as I attempted to drink the beer straight out of the oven, I mean kegerator. They advised I disassemble a metal plate from the thermostat and turn it once but it could only go one turn and that is all. In 2 days that brought it down to a bone chilling 52 degrees. Don't waste your money.

Once you work your way through getting this put together, you will not regret having this fine piece of machinery. Just be patient in the assembly. It was not very clear around the assembly regarding which washers go where... Also, the product came with out the guardrail, but a quick call to the company and they had it shipped to me in no time without any hassle! Kudos!

This is my first kegerator and it's easy to set up and works great even works with a 5lb cos tank

nice for entertaining, fits space, quiet, keeps beer cold

We love entertaining and this has made it more fun for our friends and family! Easy set up. There's even a video on YouTube if you have questions!

Came on time. Easy setup works like a beast at my tiki bar. Beer is always cold

Overall very happy with this kegorator. Traded the 2.5# CO2 bottle for 5# at the local welding supply. Nobody in Anchorage seems to carry the 2.5 # bottle so there's no sense in having it around. I read other reviews on Amazon regarding the thermostat not adjusting cold enough and had the same issue. I used their suggestion to turn the small screw on the back of the thermostat one turn clockwise and it really helped bring the temp down ~ no more issues. The CO2 line was improperly packaged [not coiled loosely] causing a severe kink during shipment. I immediately contacted the manufacturer on their website [enclosed with the owner’s manual] and was very pleased with their quick response. They shipped a new one with the fittings attached and we are good to go again. Thanks for your great customer service!! I am really happy with this product. Several people have enjoyed fresh draught beer and everyone has been impressed.

the outside had a dent on arrival, the co2 tank is only 2 1/2lbs instead of 5 which you have to wait two weeks to get it back when filling it. I just got a 5lb but now it looks to be to big to fit 16 gallon keg plus the tank in the frig. This kegerator has a really bad co2 regulator as well, I can't get it to stay at 3-4lbs of pressure. keeps creeping up to 10 all the time. I'm not happy with this product at all. Beer is flying out of the tap with huge amounts of foam due to bad regulator.

Well first, it was dented in the top back corner. When I put the tap together, the rubber around the bottom was to thick. Had to cut it in strips, and it would only fit under half, but at least it stayed in place. It doesn't get as cold as I thought it would. I paid an extra $100 for this model, the only difference I see for the money is the cheap stainless steel look. Can't find another in the area or I would probably send it back.

I was a little hesitant to buy this because of some of the unfavorable reviews, but I figured since I was a premier member, I have 60 days to return this. Well I'm on day 7 and I'm happy with this Kegerator so far. The instructions were a little vague, but it was delivered without damage, though the keg gasket had a small chunk missing that could have caused a problem, and the cap that goes on the top of the keg tower was missing, no biggie though. It keeps the beer cold, and works well. I encourage anyone that's thinking about buying one without any prior knowledge with kegs etc, to talk to a local beer distributor (or whoever sells kegs) along with a welding supply place (for the CO2) to get info to help you get setup for this, as I was totally new to this whole thing and they were helpful.

highly recommend easy to setup & use! minimum footprint