Connect your cable system to your modern HD television with this Rocketfish 4K UltraHD cable. HDR support lets you see every color as intended, and the cable handles transfer speeds up to 18 Gbps for stutter-free viewing. This Rocketfish 4K UltraHD cable is certified for in-wall installation, expanding your entertainment setup possibilities.
Supports up to 4K Ultra HD (4096 x 2160 pixels) resolution
To aid in getting the very best picture from your 4K source.
High Dynamic Range (HDR) support
To significantly increase the range of both color and contrast which creates an even more vibrant and realistic picture.
Certified for in-wall installation
For flexible installation options.
Lifetime Limited Warranty
To protect you against defect in materials and workmanship.
3-layer cable shielding with a 360° metal connector shell
Allows the cable to resist EMI and RFI interference.
Silver content soldering
Maintains the integrity of the signal between the cable and connector.
24K gold-plated contacts
Resist corrosion and promote efficient signal transfer.
I recently purchased four of the towers, a couple bookshelves, and center (I already had a nice subwoofer). I married them up with the Onkyo TX-NR656 (7.2 ch) receiver. As of yesterday I finished off our entertainment area with the Samsung UN65MU8000 television. Everything looks and sounds great!!
I used these HDMI cables to connect all the main gear together.
I would definitely purchase again, and recommend to a friend.
Good cable. Did not break, tear or fray during installation. Pulled through wall with no trouble. Way to go rockfish. Would leave a thumbs up emoji but that is against the rules. So, if they want me to respond to their surveys I will have to get creative.
A:AnswerIn regards to Hz, HDMI cables will do whatever your TV is capable of. Hz is a measure that, in layman's terms, is the refresh rate, i.e. how many times does the screen refresh in a second to produce the best possible picture. The higher the refresh rate (Hz), the less motion blur you see. Today's LED TVs have a standard refresh rate of 120-240 Hz (can go up a little more technically, but nobody is manufacturing the TVs to do so); older LCDs pretty much max out at 120 Hz; and older plasma televisions maxed out at 600 Hz, which is why you will hear a lot of people tell you that plasma televisions will still outperform most newer LED and 4K televisions (I tend to agree here having currently own a 4K and plasma). Even the earliest adaptations of the HDMI cable, pre-4K could handle the load of the 600 Hz plasma refresh rates with ease, the difference in those cables vs. the newer 4K HDMI cables is data speed. 4K needs 15 Mbps to produce the necessary 4K picture, and these cables can handle up to 18 Mbps.
Sorry for the long, drawn-out answer, but I hope this helps.
A:AnswerNo... no matter what someone says, digital is digital and transfers sound and picture at 1080p, etc. better cables are built better, creating longevity and quality at the pins (not missing pins), etc. Also, make sure your cables are certified!
If you are worried about the picture you can check the quality of your digital feed, etc. and if you have a great feed and want to get a better image then you are stuck going to 4K, but will only experience 4K with 4K feeds. Also, if you upgrade to 4K you will likely want high speed hdmi cables which increase bandwidth, etc.
I'm not an expert... just two cents from an average guy! Hope it helps.
A:AnswerYes they will. They are designed to and will. They work great with my Sony 4k and Yamaha receiver and can transmit the audio for an Arc channel hdmi. They are the latest that hdmi has to offer and do what you expect them to
A:AnswerAny HDMI cable should do the job. If you want to be sure it's the best cable around, look for cables labeled as 'High Speed', and the ones that have a sticker on them saying 'HDMI Certified Premium'. What really effects the quality is both the TV itself, as well as the source of the video playing.