ARC Audio - KS 300.2 V3 2 Channel Class G/H Amplifier - Black/Gray
Reviews coming soon
About this product
The KS 300.4 V3 truly is that SQ packed powerhouse that you have been asking for giving you the tools to create that live in-car concert that you have been asking for without breaking the bank with ultra-high-end audiophile amplifiers. Class G and Class G/H amplifiers offer the best of all possible characteristics. Power output, distortion, efficiency, heat, noise, size are all class-leading specs with this design. But why does this class of amplifier perform so well? It's built for music, not test tones or noise. When an amplifier is playing music, even at full volume, due to its dynamic nature, it is only working above 1/2 power about 10% of the time. You only need full power during the very loud passages like the impact of a drum or the pluck of a bass string. The rest of the time your 700-watt amp is making less than 350 watts. That's where the KS amp's Class G/H design comes into play. It's like having 2 amps in one. A 400-watt amp is much smaller and produces a lot less heat. Then, in a fraction of a second, your amp becomes an 800-watt monster that is ready for any musical challenge. Features: 4-Channel Full-Range Amplifier Advanced Microprocessor Control System Non-Digital Class G/H Switching Design Code-Based Flashing Diagnostics Designed By Robert Zeff Protection Against: Reverse Voltage, Over Voltage, Speaker Short, and Thermal Overload Can Drive Highly Reactive Loads Optically Isolated Mosfet Power Supply Quiet Internal Fan Cooling 2-Channels @ 4 Ohms 220 Watts 2-Channels @ 2 Ohms 360 Watts 1-Channel @ 4 Ohms (Bridged) 720 Watts Frequency Response 5Hz - 50kHz Crossover Range 55Hz - 5500Hz Bass Boost 18dB @ 45Hz S/N Ratio CEA2006 @ 1W 91.7dB S/N Ratio @ Full Power 114.9dB Input Sensitivity (Low) 200mV - 3.5V Max Current Draw 85A @ 800 Watts 1% THD Idle Current 1.14 Amp Fuse 3 x 30 Amp Dimensions 11.25(L) x 8.0"(W)x2.375"(H)
Key Feature
4-Channel Full-Range Amplifier
Key Feature
Advanced Microprocessor Control System
Key Feature
Non-Digital Class G/H Switching Design
Key Feature
Code-Based Flashing Diagnostics
Key Feature
Protection Against: Reverse Voltage, Over Voltage, Speaker Short, and Thermal Overload
- Amplifier ClassDNumber Of Channels2Bass BoostVariable
Reviews
This product doesn't have any reviews yet.
Compare similar products
The KS 300.4 V3 truly is that SQ packed powerhouse that you have been asking for giving you the tools to create that live in-car concert that you have been asking for without breaking the bank with ultra-high-end audiophile amplifiers. Class G and Class G/H amplifiers offer the best of all possible characteristics. Power output, distortion, efficiency, heat, noise, size are all class-leading specs with this design. But why does this class of amplifier perform so well? It's built for music, not test tones or noise. When an amplifier is playing music, even at full volume, due to its dynamic nature, it is only working above 1/2 power about 10% of the time. You only need full power during the very loud passages like the impact of a drum or the pluck of a bass string. The rest of the time your 700-watt amp is making less than 350 watts. That's where the KS amp's Class G/H design comes into play. It's like having 2 amps in one. A 400-watt amp is much smaller and produces a lot less heat. Then, in a fraction of a second, your amp becomes an 800-watt monster that is ready for any musical challenge. Features: 4-Channel Full-Range Amplifier Advanced Microprocessor Control System Non-Digital Class G/H Switching Design Code-Based Flashing Diagnostics Designed By Robert Zeff Protection Against: Reverse Voltage, Over Voltage, Speaker Short, and Thermal Overload Can Drive Highly Reactive Loads Optically Isolated Mosfet Power Supply Quiet Internal Fan Cooling 2-Channels @ 4 Ohms 220 Watts 2-Channels @ 2 Ohms 360 Watts 1-Channel @ 4 Ohms (Bridged) 720 Watts Frequency Response 5Hz - 50kHz Crossover Range 55Hz - 5500Hz Bass Boost 18dB @ 45Hz S/N Ratio CEA2006 @ 1W 91.7dB S/N Ratio @ Full Power 114.9dB Input Sensitivity (Low) 200mV - 3.5V Max Current Draw 85A @ 800 Watts 1% THD Idle Current 1.14 Amp Fuse 3 x 30 Amp Dimensions 11.25(L) x 8.0"(W)x2.375"(H)
Arc Audio X2 850.5 Multi-Channel Amplifier (5-Channels) Multi-Channel Amplifier (5-Channels) Microprocessor Class-D Design Designed And Engineered By Robert Zeff High-Frequency Power Supply Design For Improved Signal Transparency And Overall Sound Quality) Level 1 X2 Cosmetics Package - Texture Coated Stamped Steel Cosmetic Cover With Aluminum Logo Badge. (Changable to Level-2 XDi Cosmetics) Single Side Connection Design Full-Range Design Nickel Plated RCA Terminals Quick Disconnect Speaker Terminal Plugs Audiophile Class-D Output Filter Networks Detailed Micro Processor Controlled Protection Large, High-Frequency Switching Power Supplies RCA Inputs Are Compatible With Speaker Level Inputs Fault Codes Storage Of The Last Protection Code Detected High Signal To Noise Ratio Without Compromising Power Output Fully Balanced Input Stage Significantly Increases Flexibility Ultra-Low ESR, High-capacity Power Supply Storage Capacitors Flexible Mounting Orientation For Vertical Or Horizontal Installations Next Generation High-Speed Class-D Technology Powering All XDi Amplifiers. Bridged Mode Auto Detect Turn-On Works With Most Chip Based OEM Head Units Precision Filtering Isolates The Power Supply Reducing Unwanted Interference In Radio Reception Block Type Terminal Connections Specifications - 4-Channels @ 4 Ohms (Ch 1-4) - 85 Watts 4-Channels @ 2 Ohms (Ch 1 - 4) - 125 Watts 2-Channel @ 4 Ohms (Ch 1-4 Bridged) - 250 Watts 1-Channel @ 4 Ohms (Ch 5) - 225 Watts 1-Channel @ 2-Ohms (Ch 5) - 400 Watts Frequency Response - 20Hz - 20kHz Crossover Range (Ch 1-4) - 50Hz - 550Hz Crossover Range (Ch 5) - 30Hz - 230Hz Bandpass Capable - No Bass Boost - Variable 0-12 dB @ 45Hz Cosmetic Trim - XDi Trim Level 1 Remote Level Control Included - Yes Input Sensitivity (Low) - 200mV - 3.5V Fuse - 3 x 30 Amp Dimensions - 12.42"(L) x 6.268"(W)x2.162"(H)
PowerBass XL-2305MX 600 Watt RMS 2ch PowerSport Amplifier The XL series was developed for the growing Power Sports market including UTV and Marine applications, where electronics must withstand harsh damp environments. The circuit boards have been conformal coated with a layer of transparent material that protects the parts against moisture, dust and extreme temperatures. These ultra small weather resistant amplifiers are ideal for all types of outdoor audio applications such as motorcycles, golf carts and off road vehicles. But the small size also makes these amps a great choice anywhere space is a premium. Features - • IPX67 Water Resistant Sealed Design • Aluminum Die-Cast end caps with integrated input / output connectors • 1200 Watt High Efficiency Full-Range Class D Design • 2-OHM Stable Stereo Amplifier • International Rectifier® Chip Set • Ultra Low Current Draw • 4-Layer Copper Plated PCB • Conformal Coated PC Board • PWM MOSFET Power Supply • Digital Sound Optimization Circuitry • High Damping Control Circuit • High Current Voltage Ripple Rejection Circuitry • Remote Soft Delay Turn On/Off Circuit • Variable Low/High Pass Electronic Crossover • Variable 18dB Bass Boost EQ • Variable Gain Control • Remote Gain Control Included Specifications - • Selectable Subwoofer EQ: 0-18d B Gain @ 45Hz, Rear Ch. • Inputs: RCA (speaker level compatible)/3.5mm Mini Jack Input • Equalization Boost/Cut: 0 - 18 dB • Subwoofer Frequency Range: 10 Hz - 400Hz • 4-ohm Mono Power: 600 watts x 1 • 4-ohm Power: 150 watts x 2 • 2-ohm Power: 300 watts x 2 • Subwoofer EQ Frequency: 45 Hz • Low-Pass Crossover Freq: 40 Hz - 400 Hz • High-Pass Crossover Freq: 40 Hz - 400 Hz • Peak Power: 1200 watts • Crossover Slope: 12 dB • Dimensions (in Inches): 8.5" x 4.6" x 1.8" • Input Sensitivity: 0.25 V - 10.0 V • S/N Ratio: >85 dB • Total Harmonic Distortion: 0.04% at Rated Power • Channels (mono): 4 • Frequency Response: 10 Hz - 40 kHz
Introducing the PowerBass ASA3-1200.2 2-Channel Amplifier – where power meets precision! This beast packs a punch with 1200 watts of RMS power, making it ideal for elevating your car audio experience. It's designed for flexibility, offering 2-ohm stereo and 4-ohm mono stability, ensuring compatibility with various setups, with the MOSFET power supply that ensures efficient and reliable performance. Fine-tune your sound with the variable 12 dB high/low pass electronic crossover and adjustable bass boost. Plus, the optional remote gain control lets you command your music from the driver's seat. With low distortion (94dB Input Sensitivity: 0.2 - 6.0 volts Crossover Slope: 12dB High-Pass Crossover Freq (Hz): 40Hz-250Hz Low-Pass Crossover Freq (Hz): 40Hz-250Hz Variable Subwoofer EQ: 0/+18dB Subwoofer EQ Frequency: 45Hz Dimensions (L x W x H): 23" x 8.3" x 2.3" UPC: 823871006113 Maximum Power : 2400 Watts Number of Channels : 2 Frequency Response : 20-22k Hz Built In Crossovers : Yes Channel Separation : Yes RMS Power Range : 1200 Watts Amplifier Class : A/B
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
More to consider
Enjoy your ride Sponsored
Keep exploring
$329.99The price was $349.99
