ARC Audio - KS 300.4 V3 KAR Series Class G/H Amplifier - Black/Gray
Reviews coming soon
About this product
Arc Audio KS 300.4 V3 KAR Series Class G/H Amplifier Class G and Class G/H amplifiers offer the best of all possible characteristics. Power output, distortion, efficiency, heat, noise, size are all class leading specs with this design. But why does this class of amplifier perform so well? It's built for music, not test tones or noise. When an amplifier is playing music, even at full volume, due to its dynamic nature, it is only working above 1/2 power about 10% of the time. You only need full power during the very loud passages like the impact of a drum or the pluck of a bass string. The rest of the time your 700-watt amp is making less than 350 watts. It's like having 2 amps in one. A 400-watt amp is much smaller and produces a lot less heat. Then, in a fraction of a second, your amp becomes an 800-watt monster that is ready for any musical challenge. The trick to making this work is in striking a balance between switching the high-power section on and off. 4-Channel Full Range Amplifier Advanced Microprocessor Control System Non-Digital Class G/H Switching Design Code Based Flashing Diagnostics Designed By Robert Zeff Protection Against: Reverse Voltage, Over Voltage, Speaker Short, and Thermal Overload Can Drive Highly Reactive Loads Optically Isolated Mosfet Power Supply Quiet Internal Fan Cooling 4-Channels @ 4 Ohms: 120 Watts 4-Channels @ 2 Ohms: 190 Watts 2-Channel @ 4 Ohms (Bridged): 380 Watts Frequency Response: 5Hz - 50kHz Crossover Range: 55Hz - 5500Hz Bass Boost: 18dB @ 45Hz S/N Ratio CEA2006 @ 1W: 95.2dB S/N Ratio @ Full Power: 115.0dB Input Sensitivity (Low): 200mV - 3.5V Max Current Draw: 85A @ 800 Watts 1% THD Idle Current: 1.14 Amp Fuse: 3 x 30 Amp Dimensions: 11.25(L) x 8.0"(W)x2.375"(H)
Features
Key Feature
Advanced Microprocessor Control System
Key Feature
Non-Digital Class G/H Switching Design
Key Feature
Protection Against: Reverse Voltage, Over Voltage, Speaker Short, and Thermal Overload
Key Feature
Can Drive Highly Reactive Loads
Key Feature
Optically Isolated Mosfet Power Supply
Specifications
- Amplifier ClassDNumber Of Channels4Bass BoostVariable
Reviews
This product doesn't have any reviews yet.
Compare similar products

Arc Audio KS 300.4 V3 KAR Series Class G/H Amplifier Class G and Class G/H amplifiers offer the best of all possible characteristics. Power output, distortion, efficiency, heat, noise, size are all class leading specs with this design. But why does this class of amplifier perform so well? It's built for music, not test tones or noise. When an amplifier is playing music, even at full volume, due to its dynamic nature, it is only working above 1/2 power about 10% of the time. You only need full power during the very loud passages like the impact of a drum or the pluck of a bass string. The rest of the time your 700-watt amp is making less than 350 watts. It's like having 2 amps in one. A 400-watt amp is much smaller and produces a lot less heat. Then, in a fraction of a second, your amp becomes an 800-watt monster that is ready for any musical challenge. The trick to making this work is in striking a balance between switching the high-power section on and off. 4-Channel Full Range Amplifier Advanced Microprocessor Control System Non-Digital Class G/H Switching Design Code Based Flashing Diagnostics Designed By Robert Zeff Protection Against: Reverse Voltage, Over Voltage, Speaker Short, and Thermal Overload Can Drive Highly Reactive Loads Optically Isolated Mosfet Power Supply Quiet Internal Fan Cooling 4-Channels @ 4 Ohms: 120 Watts 4-Channels @ 2 Ohms: 190 Watts 2-Channel @ 4 Ohms (Bridged): 380 Watts Frequency Response: 5Hz - 50kHz Crossover Range: 55Hz - 5500Hz Bass Boost: 18dB @ 45Hz S/N Ratio CEA2006 @ 1W: 95.2dB S/N Ratio @ Full Power: 115.0dB Input Sensitivity (Low): 200mV - 3.5V Max Current Draw: 85A @ 800 Watts 1% THD Idle Current: 1.14 Amp Fuse: 3 x 30 Amp Dimensions: 11.25(L) x 8.0"(W)x2.375"(H)

Arc Audio X2 600.4 Multi-Channel Amplifier (Four-Channels) Multi-Channel Amplifier (Four-Channels) Microprocessor-Controlled Class-D Design Designed And Engineered By Robert Zeff High-Frequency Power Supply Design For Improved Signal Transparency And Overall Sound Quality Remote Bass Boost Control (Included) Extruded Aluminum CNC Chassis Design (Level 2 X2 Cosmetics) Start-Stop Vehicle Compatible Signal Sense and DC Detect Single Side Connection Design Nickel Plated RCA Terminals Quick Disconnect Speaker Terminal Plugs Audiophile Class-D Output Filter Networks Detailed Microprocessor Controlled Protection Large, High-Frequency Switching Power Supplies RCA Inputs Are Compatible With Speaker-Level Inputs Fault Codes Storage Of The Last Protection Code Detected Hi Signal To Noise Ratio Without Compromising Power Output Fully Balanced Input Stage Significantly Increases Flexibility Ultra Low ESR, High-Capacity Power Supply Storage Capacitors Flexible Mounting Orientation For Vertical Or Horizontal Installations Next Generation High Speed Class-D Technology Powering All X2 Amplifiers Bridged Mode Auto Detect Turn-On Works With Most Chip Based OEM Headunits Precision Filtering Isolates The Power Supply Reducing Unwanted Interference In Radio Reception Quick Disconnect Type Terminal Connections Specifications - 4- Channels @ 4 Ohms - 150 Watts 4-Channels @ 2 Ohms - 150 Watts 2-Channel @ 4 Ohms (Bridged) - 300 Watts 2-Channel @ 2-Ohms (Bridge) - Not Recommended Frequency Response - 20Hz - 20kHz Crossover Range - 50Hz - 550Hz Crossover Types - HP/LP on all channels Bandpass Crossovers - Yes Ch 3/4 Only Remote Level Control - Yes Remote Level Control Included - Yes - LP Front Channel only Input Sensitivity (Low) - 200mV - 3.5V Fuse - 2 x 30 Amp Dimensions - 9.020"(L) x 6.268"(W) x 2.162"(H)

The H-KO340/RD is a 4-channel car amplifier from the DS18 HOOLIGAN KO series, built as a Class D design. It delivers 2 x 1000 watts RMS at 4 ohms, 4 x 550 watts RMS at 2 ohms and 4 x 300 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. Total harmonic distortion is rated at less than 0.2% with a signal-to-noise ratio of greater than 90dB. A selectable HPF/LPF/BAND-PASS crossover covers HPF: 20Hz-8KHz / LPF: 50Hz-8KHz (1X/10X), so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from No centered between N/A. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.

PowerBass XMA-5900IR 1600 Watt 5ch Compact Amplifier The XMA amplifiers carry on the tradition of looking good and sounding great while taking up less space than any other amplifier we have ever offered – and smaller than most amps available from the majority of our competitors’ at the same output levels. High efficiency FRD (Full Range Digital) technology allows these amplifiers to operate at well over 85% efficiency. Limited space no longer means sacrificing great sound with the new PowerBass XMA Amplifiers. Features - • 1,600 Watt High Efficiency Full-Range Class D Design • 2-OHM Stable Five Channel Amplifier • Ultra Low Current Draw • Double Sided Copper Plated PCB • PWM MOSFET Power Supply • Digital Sound Optimization Circuitry • High Damping Control Circuit • Variable Subsonic Filter • High Current Voltage Ripple Rejection Circuitry • Balanced RCA Inputs • Auto Turn On/Off • Remote Soft Delay Turn On/Off Circuit • Variable Gain Control • Wired Secondary Remote Gain Control Included Specifications - • Selectable Subwoofer EQ: 0-18dB Gain @ 45Hz • Inputs: 3 Pairs RCA (speaker level compatible) • Subwoofer Frequency Range: 10 Hz - 250 Hz • 4-ohm Mono Power: 400 watts x 2 + 500 watts x 1 (4-ohm) • 4-ohm Power: 100 watts x 4 + 500 watts x 1 • 2-ohm Power: 200 watts x 4 + 800 watts x 1 • Subwoofer EQ Frequency: 45 Hz • Variable Subwoofer EQ: 0 - 18 dB • Low-Pass Crossover Freq: 25 Hz - 250 Hz • High-Pass Crossover Freq: 50 Hz - 350 Hz • Peak Power: 3200 watts • Crossover Slope: 12 dB • Dimensions (in Inches): 14.7" x 7.1" x 2.0" • Input Sensitivity: 0.25 V - 10.0 V • S/N Ratio: >90 dB • Total Harmonic Distortion: 0.04% at Rated Power • Output Power (14.4 V) @ 4 ohm: 100 watts x 4 + 500 watts x 1 • Output Power (14.4 V) @ 2 ohm: 200 watts x 4 + 800 watts x 1 • Channels (mono): 5 • Frequency Response: 10 Hz - 40 kHz
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.





































