Powerbass - XMA-5900IR - 200 Watt x 4 + 800 Watt x 1 @ 2-Ohm FRD Amplifier - Black/Gray

The new PBM Series Mini Amplifiers are the latest development from the engineering department here at PowerBass. We set out to make the world of "mini" amps better providing more power in less space but also providing clean output signal while keeping the current demand low and the power output high! The circuit boards have been conformal coated with a layer of transparent material that protects the parts against moisture, dust and extreme temperatures making the PBM series great for motorcycles and any install that might see dust and moisture in the installation area when space is limited but extreme power is needed. Features: 500 Watt High Efficiency Class D Design 2-OHM Stable Mono Block Amplifier Ultra Low Current Draw Conformal Coated PC Board Digital Sound Optimization Circuitry High Damping Control Circuit Variable Subsonic Filter High Current Voltage Ripple Rejection Circuitry Variable Low Pass Electronic Crossover Variable 12dB Bass Boost EQ Variable Gain Control Wired Secondary Remote Gain Control Included Specifications Peak Power: 600 watts x 1 Subwoofer Frequency Range: 10 Hz - 250 Hz Power Supply: Unregulated PWM Inputs: RCA Dimensions (in Inches): 7.3"x4.43"x2" Channels (mono): 1 4-ohm Power: 250 watts x 1 4-ohm Mono Power: 250 watts x 1 2-ohm Power: 500 watts x 1 1-ohm Mono Power: N/A Selectable Subwoofer EQ: 0-18 dB Gain @ 45Hz Variable Subsonic Freq: 10 Hz - 50 Hz Equalization Boost/Cut: 0 - 18 dB Height: 2" Width: 4.43" Subwoofer EQ Frequency: 45 Hz Variable Subwoofer EQ: 0 - 18 dB Low-Pass Crossover Freq: 50 Hz - 250 Hz High-Pass Crossover Freq: N/A Crossover Slope: 24 dB Input Sensitivity: 0.25 V - 10.0 V S/N Ratio: >85 dB Total Harmonic Distortion: 0.4% at Rated Power Strapped Output Power @ 2ohms: N/A Output Power (14.4 V) @ 4 ohm: 250 watts x 1 Output Power (14.4 V) @ 2 ohm: 500 watts x 1 Output Power (14.4 V) @ 1 ohm: N/A Frequency Response: 10 Hz - 300 Hz

PowerBass XMA-2000D 2000 Watt Mono Block Compact Amplifier The XMA amplifiers carry on the tradition of looking good and sounding great while taking up less space than any other amplifier we have ever offered – and smaller than most amps available from the majority of our competitors’ at the same output levels. High efficiency FRD (Full Range Digital) technology allows these amplifiers to operate at well over 85% efficiency. Limited space no longer means sacrificing great sound with the new PowerBass XMA Amplifiers. Features - • 2,000 Watt High Efficiency Class D Design • 1-OHM Stable Mono Block Amplifier • Ultra Low Current Draw • PWM MOSFET Power Supply • Digital Sound Optimization Circuitry • High Damping Control Circuit • Variable Subsonic Filter • Balanced RCA Inputs • 40 Click Variable Low Pass Electronic Crossover • 40 Click Variable Frequency/18dB Bass Boost EQ • Variable Gain Control • Wired Secondary Remote Gain Control Included • Strapable Dual Amp Power Doubling Circuit (Amp-to-Amp Bridged at 2 ohm minimum) Specifications - • Selectable Subwoofer EQ: 0 - 18 dB @ 40 Hz - 100 Hz • Variable Subsonic Freq: 10 Hz - 50 Hz • Inputs: RCA (speaker level compatible) • Equalization Boost/Cut: 0 - 18 dB • Subwoofer Frequency Range: 10 Hz - 250 Hz • 4-ohm Mono Power: 700 watts x 1 • 4-ohm Power: 700 watts x 1 • 1-ohm Mono Power: 2000 watts x 1 • 2-ohm Power: 1400 watts x 1 • Subwoofer EQ Frequency: 40 Hz- 100 Hz • Variable Subwoofer EQ: 0 - 18 dB • Low-Pass Crossover Freq: 20 Hz - 250 Hz • Peak Power: 4000 watts • Crossover Slope: 24 dB • Dimensions (in Inches): 18.3" x 7.1" x 2.0" • Input Sensitivity: 0.25 V - 10.0 V • S/N Ratio: >100 dB • Total Harmonic Distortion: 0.4% at Rated Power • Strapped Output Power @ 2ohms: 4000 watts x 1 • Output Power (14.4 V) @ 4 ohm: 700 watts x 1 • Output Power (14.4 V) @ 2 ohm: 1400 watts x 1 • Output Power (14.4 V) @ 1 ohm: 2000 watts x 1 • Frequency Response: 10 Hz - 300 Hz

Take your Stinger car audio to the next level with the MT Series by Stinger Audio: sleek, compact monoblock amplifiers designed to integrate into any vehicle sound system. Harnessing the power of Class D circuitry, these amplifiers efficiently drive your speakers, producing clarity and vibrancy in sound reproduction. Utilizing advanced MOSFET technology alongside top-tier capacitors, transformers, and cutting-edge inductors, our amplifiers deliver a sonic experience that transcends expectations.