Audio-Technica - AT-VM520xEB/H VMx Headshell & Dual MM Cartridge Combo Kit - Black/Blue

The AT-VMx series elevates premium dual moving magnet cartridges with added warmth, detail, and realism for engaging vinyl playback. Dual magnets aligned to the stereo groove mirror the cutter head geometry, delivering excellent tracking, wide frequency response, and precise channel separation. Upgrades such as high-purity copper coils, fewer coil turns, a paratoroidal generator, and a center shield plate reduce crosstalk and sharpen transient response for a clean, stable stereo image. An elliptical nude stylus on an aluminum cantilever extracts nuance with control, while a low-resonance polymer body preserves clarity. Threaded mounting inserts, a V-cut stylus guard, and interchangeable styli make setup simple and sound tuning effortless across any standard half-inch headshell.

The AT-VM95E/H combo kit includes the AT-VM95E dual moving magnet cartridge premounted on the AT-HS6BK headshell.FeaturesElliptical Bonded Stylus on an Aluminum CantileverDual Moving Magnet DesignDurable Low-Resonance HosingHigh Output Level (4.0mV)VM95 SeriesThis VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.What's in the BoxAT-VM95E/H Headshell & MM Cartridge Combo KitInstallation HardwareSpecificationsFrequency Response: 20-22000 HzChannel Separation: 20 (dB at 1 kHz)Vertical Tracking Angle: 23°Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)Stylus Construction: Bonded round shankRecommended Load Impedance: 47000 ohmsCoil Impedance: 3.3 k ohms (1 kHz)DC Resistance: 485 ohmsCoil Inductance: 550 mH (1 kHz)Output Voltage: 4.0 mV (1 kHz 5 cm/sec.)Output Channel Balance: 2.0 dB (1 kHz)Stylus Shape: 0.3 x 0.7 mil ellipticalCantilever: Aluminum pipeStatic Compliance: 17 x 10 – 6 cm / dyneDynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)Mounting: Half-inchDimensions (Cartridge & Headshell): 0.84" x 0.83" × 2.46"Model: AT-VM95E/HMounting Feature: H

The AT VM750xSH H combo kit delivers a refined vinyl upgrade with a Shibata dual moving magnet cartridge factory mounted on the AT LT10 universal headshell for fast and accurate installation. Part of the updated VMx series, this cartridge features a solid boron cantilever, precision Shibata stylus, paratoroidal coils, and a center shield plate to enhance channel separation, balance, and transient response while reducing crosstalk. A low resonance polymer body and metal construction preserve musical detail and dynamics. The lightweight aluminum die cast headshell minimizes vibration, allows precise alignment, and uses oxygen free copper leads and a secure finger lift for confident cueing and consistent, high fidelity playback.