Audio-Technica - AT-XP5 MM DJ Cartridge - Red/Black

This VM95 Series cartridge with 0.3 x 0.7 mil elliptical nude stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus. Aluminum cantilever. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required. Compatible with any AT-VMN95 replacement stylus.

The OM 5S features Spherical stylus robust and economic solution for play back of vinyl records. If your tonearm has a standard headshell or a cartridge mount then step up to optimal sound reproduction with OMs. A glance at any one of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny removable weight-plate.FeaturesImproved Linearity Higher Channel Separation And Reduced DistortionRemovable Weight PlateLowest-Mass Range Of MM Cartridges Offered By OrtofonStylus Type: SphericalStyli Types And InterchangeabilityBy adopting a wide range of replacement styli the OM 5 Series can provide an optimum match for your home system application and budget. In the development of OM cartridges a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Depending on your preference styli for the OM 5 Series are easily interchanged and include: 3E 5E 10 20 30 40 78 and D 25 M.What's in the BoxOM 5S MM Phono CartridgeSpecificationsChannel balance at 1 kHz: 2 dBOutput voltage at 1 kHz 5cm/sec: 4.5 mVChannel separation at 1 kHz: 20 dBChannel separation at 15 kHz: 12 dBFrequency response 20 Hz - 20 kHz: 20-20.000 HzTracking ability at 315Hz at recommended tracking force: 60 µmCompliance dynamic lateral: 20 µm/mNStylus type: SphericalStylus tip radius: R 18 µmTracking force range: 1.5-2.0 g (15-20 mN)Tracking force recommended: 1.75

The AT-VM740xML/H combo kit includes the AT-VM740xML microlinear dual moving magnet cartridge premounted on the AT-LT10 universal 1/2"-mount headshell. The AT-VM740xML is part of the updated AT-VMx series which introduces material and design changes to further refine the VM sound offering responsive playback that is especially sensitive to the dynamism of musical expression.FeaturesAT-VM740xML Dual Moving Magnet CartridgeMicrolinear StylusParatoroidal Coils Improve Channel Separation Channel Balance and Transient ResponseCenter Shield Plate Reduces CrosstalkDurable Low-Resonance Polymer HousingAluminum CantileverCompatible with Any Turntable Headshell That Accepts 1/2” CartridgesAT-LT10 Universal ½”-Mount HeadshellFor 4-Pin Turntable Cartridges with or Without Threaded InsertsUltra-Lightweight Aluminum Die-Cast Body Keeps Vibration to the Bare MinimumElongated Through Holes Enable Precise Cartridge Positioning and Overhang AdjustmentOFC (Oxygen-Free Copper) Lead Wires for Exceptional Sound QualitySlip-Resistant Finger Lift Allows Stylus to Be Placed Precisely on the RecordIncludes Mounting ScrewsWhat's in the BoxAT-VM740xML/H VMx Headshell & Microlinear Dual MM Cartridge Combo KitInstallation HardwareManualSpecificationsType: VMFrequency response: 20 to 25000 HzOutput voltage: 3.2 mV (1 kHz 5 cm/sec.)Channel separation: 25 dB (1 kHz)Output balance: 1.0 dB (1 kHz)Tracking force: 1.8 to 2.2 g (2.0 g standard)Coil impedance: 3.2 k ohms (1 kHz)DC resistance: 750 ohmsRecommended load impedance: 47 k ohmsRecommended load capacitance: 150 to 250 pF<