Audio-Technica - AT33xEN Dual Moving Coil Stereo Cartridge - Red
Audio-Technica - AT33xEN Dual Moving Coil Stereo Cartridge - Red
FREE shipping to
Related Item
About This Item
- Key Specs
- Accessory Type: Other
- Model Compatibility: Universal
- General
- Brand: Audio-Technica
- Model Number: AT33XEN
- Product Name: Audio-Technica AT33xEN Dual Moving Coil Stereo Cartridge
- Color: Red
- Features
- Accessory Type: Other
- Quantity: 1
- Compatibility
- Model Compatibility: Universal
- Dimensions
- Product Height: 6.0 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 3.0 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 6.0 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Warranty
- Warranty - Parts: 1 year limited
- Warranty - Labor: None
- Other
- UPC: 4961310164041
The AT33xEN is a versatile cartridge that delivers warm full-bodied audio with excellent tracking and high-frequency control thanks to its 0.3 x 0.7 mil elliptical nude stylus on a duralumin tapered cantilever. Its advanced suspension system with piano wire enhances accuracy and mid-low range response while the composite body of zinc aluminum and high-rigidity polymer reduces resonance for balanced natural sound. The dual moving coil design with PCOCC coils ensures outstanding channel separation and smooth signal transmission supported by a neodymium magnet and permendur yoke for high efficiency and resolution.FeaturesDual Moving Coil Cartridge with Elliptical Nude StylusPCOCC Coils Ensure Smooth Signal TransmissionComposite Body Reduces Resonance for Balanced SoundMaterial DifferenceThe AT33xEN’s rigid duralumin pipe cantilever which tapers toward the elliptical stylus tip for improved response is linked with a firm suspension mechanism slightly lowering the dynamic compliance. Two independent PCOCC coils are positioned at the cantilever’s fulcrum to ensure pure signal transmission for each channel.Sound BodyEach AT33x Series cartridge body is constructed of three distinct materials – die-cast zinc aluminum and high-rigidity polymer – optimally arranged to reduce and disperse resonance across the cartridge body so that no frequency predominates during playback. Threaded holes are incorporated into the body for easy mounting.Full Warm SoundThe redesigned AT33x Series cartridges deliver that classic analog sound rich in detail across the audio spectrum with lifelike expressiveness in the mid to low frequencies.What's in the BoxAT33xEN Dual Moving Coil Stereo CartridgeInstallation KitManualSpecificationsType: MCFrequency Response: 20 to 40000 HzOutput Voltage: 0.4 mV (1 kHz 5 cm/sec.)Channel Separation: 27 dB (1 kHz)Output Balance: 1.0 dB (1 kHz)Tracking Force: 1.8 to 2.2 g (2.0 g standard)Coil Impedance: 12 ohms (1 kHz)DC Resistance: 12 ohmsR
- Premium Audio & Video Accessory: AT33x Series dual moving coil cartridge with elliptical nude stylus for accurate playback
Whats Included
- Audio-Technica AT33XEN with product manual
Reviews
This product doesn't have any reviews yet.
Compare similar products
The AT33xEN is a versatile cartridge that delivers warm full-bodied audio with excellent tracking and high-frequency control thanks to its 0.3 x 0.7 mil elliptical nude stylus on a duralumin tapered cantilever. Its advanced suspension system with piano wire enhances accuracy and mid-low range response while the composite body of zinc aluminum and high-rigidity polymer reduces resonance for balanced natural sound. The dual moving coil design with PCOCC coils ensures outstanding channel separation and smooth signal transmission supported by a neodymium magnet and permendur yoke for high efficiency and resolution.FeaturesDual Moving Coil Cartridge with Elliptical Nude StylusPCOCC Coils Ensure Smooth Signal TransmissionComposite Body Reduces Resonance for Balanced SoundMaterial DifferenceThe AT33xEN’s rigid duralumin pipe cantilever which tapers toward the elliptical stylus tip for improved response is linked with a firm suspension mechanism slightly lowering the dynamic compliance. Two independent PCOCC coils are positioned at the cantilever’s fulcrum to ensure pure signal transmission for each channel.Sound BodyEach AT33x Series cartridge body is constructed of three distinct materials – die-cast zinc aluminum and high-rigidity polymer – optimally arranged to reduce and disperse resonance across the cartridge body so that no frequency predominates during playback. Threaded holes are incorporated into the body for easy mounting.Full Warm SoundThe redesigned AT33x Series cartridges deliver that classic analog sound rich in detail across the audio spectrum with lifelike expressiveness in the mid to low frequencies.What's in the BoxAT33xEN Dual Moving Coil Stereo CartridgeInstallation KitManualSpecificationsType: MCFrequency Response: 20 to 40000 HzOutput Voltage: 0.4 mV (1 kHz 5 cm/sec.)Channel Separation: 27 dB (1 kHz)Output Balance: 1.0 dB (1 kHz)Tracking Force: 1.8 to 2.2 g (2.0 g standard)Coil Impedance: 12 ohms (1 kHz)DC Resistance: 12 ohmsR
Optimal Fit & Sound ReproductionIf your tonearm has a standard headshell or a cartridge mount then step up to optimal sound reproduction with OMs. A glance at any one of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny removable weight-plate.FeaturesOrtofon's Lowest-Mass Range of MM CartridgeRemovable Weight-PlateDesigned for Easy Mounting & AlignmentExcellent Stylus CompatibilityStyli Types And InterchangeabilityBy adopting a wide range of replacement styli the OM 5 Series can provide an optimum match for your home system application and budget. In the development of OM cartridges a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage the OM 5 Series allows you to step up to better sound by simply upgrading the stylus.Stylus CompatibilityDepending on your preference styli for the OM 5 Series are easily interchanged and include: styli 3E 5E 10 20 30 40 & 78 and D 25 M.What's in the BoxOM 5E MM Phono CartridgeSpecificationsChannel balance at 1 kHz: 2 dBOutput voltage at 1 kHz 5cm/sec: 4 mVChannel separation at 1 kHz: 22 dBChannel separation at 15 kHz: 15 dBFrequency response 20 Hz - 20 kHz: 20-20.000 Hz + 3 / -3Tracking ability at 315Hz at recommended tracking force: 60 µmCompliance dynamic lateral: 20 µm/mNStylus type: EllipticalStylus tip radius: r/R 8/18 µmTracking force range: 1.5-2.0 g (15-20 mN)Tracking force recommended: 1.75 g (17.5 mN)Tracking angle: 20°Internal impedance DC resistance: 750 OhmCartridge color: Black/BlackCartridge weightincl. extra weight: 5 gexcl. extra weight: 2.5 gRecommended load resistance: 47 kOhmInternal inductance: 450 mHRecommended load capacitance: 200-500 pFReplacement stylus: Stylus 5E
The VM540ML MicroLine stylus cartridge is the premier 500 Series model in Audio-Technica's VM cartridge line - a line that harks back to A-T's early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today's advanced technology. Like all VM cartridges, the VM540ML is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge's MicroLine stylus allows it to trace the record groove with incredible accuracy, resulting in nuanced audio reproduction that elliptical and conical styli simply can't match. The stylus's multilevel shape also wears better than other styli, while reducing the wear on your records. Includes mounting hardware.
The AT-VM740xML/H combo kit includes the AT-VM740xML microlinear dual moving magnet cartridge premounted on the AT-LT10 universal 1/2"-mount headshell. The AT-VM740xML is part of the updated AT-VMx series which introduces material and design changes to further refine the VM sound offering responsive playback that is especially sensitive to the dynamism of musical expression.FeaturesAT-VM740xML Dual Moving Magnet CartridgeMicrolinear StylusParatoroidal Coils Improve Channel Separation Channel Balance and Transient ResponseCenter Shield Plate Reduces CrosstalkDurable Low-Resonance Polymer HousingAluminum CantileverCompatible with Any Turntable Headshell That Accepts 1/2” CartridgesAT-LT10 Universal ½”-Mount HeadshellFor 4-Pin Turntable Cartridges with or Without Threaded InsertsUltra-Lightweight Aluminum Die-Cast Body Keeps Vibration to the Bare MinimumElongated Through Holes Enable Precise Cartridge Positioning and Overhang AdjustmentOFC (Oxygen-Free Copper) Lead Wires for Exceptional Sound QualitySlip-Resistant Finger Lift Allows Stylus to Be Placed Precisely on the RecordIncludes Mounting ScrewsWhat's in the BoxAT-VM740xML/H VMx Headshell & Microlinear Dual MM Cartridge Combo KitInstallation HardwareManualSpecificationsType: VMFrequency response: 20 to 25000 HzOutput voltage: 3.2 mV (1 kHz 5 cm/sec.)Channel separation: 25 dB (1 kHz)Output balance: 1.0 dB (1 kHz)Tracking force: 1.8 to 2.2 g (2.0 g standard)Coil impedance: 3.2 k ohms (1 kHz)DC resistance: 750 ohmsRecommended load impedance: 47 k ohmsRecommended load capacitance: 150 to 250 pFCoil inductance: 480 mH (1 kHz)Static compliance: 20 × 10?6 cm/dyneDynamic compliance: 7 × 10?6 cm/dyne (100 Hz)Stylus: Nude MicrolinearStylus curvature radius: 2.2 × 0.12 milCantilever: Aluminum tapered pipeVertical tracking angle: 20°Dimensions: 2.7” × 0.73” × 0.85”Weight: 20.3 g (0.72 oz)Replacement stylus (sold separately): AT-VMN40xML
