AudioControl - 2-Channel Active Line Output Converter with AccuBASS and Subwoofer Control - Black
AudioControl - 2-Channel Active Line Output Converter with AccuBASS and Subwoofer Control - Black
About This Item
- General
- Brand: AudioControl
- Model Number: LC2i PRO
- Product Name: 2-Channel Active Line Output Converter with AccuBASS and Subwoofer Control
- Color: Black
- Compatibility
- Vehicle Compatibility: Most vehicles with factory-installed audio systems
- Product Compatibility: Amplifier
- Product Type: Line output converter
- Dimensions
- Product Height: 1 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Length: 3 inches (The out of box length of the item. Length is measured as the longest dimension of the item.)
- Product Width: 6.9 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Weight: 0.75 pounds (The out of box weight of the item.)
- Warranty
- Warranty - Parts: 5 years
- Warranty - Labor: 5 years
- Other
- UPC: 851523007782
Easily add an aftermarket amplifier or subwoofer to your vehicle’s factory audio system with this 2-Channel Active Line Output Converter with AccuBASS and Subwoofer Control by AudioControl. The LC2i PRO converts speaker-level (high-level) audio signals to RCA preamp (low-level) signals so you can install an aftermarket amplifier or subwoofer without replacing your factory radio. This two-channel line output converter also features AccuBASS technology so you can turn up the volume without losing bass.
- Compatible with most vehicles’ OEM audio systems: For use when adding aftermarket amplifiers to car audio systems without RCA preamp outputs.
- 2-channel interface with dual amplifier preamp outputs: Features one set of active speaker-level inputs, one set of full range main line-level outputs, and one set of low-passed (1000 Hz) bass line-level outputs for adding an aftermarket subwoofer.
- 400W (40V) peak power input per channel @ 20k ohms: For high-quality sound.
- 9.5V RMS (13V peak) maximum output voltage @ 14.4V: For efficient operation.
- AccuBASS processing: Recovers bass frequencies lost at higher volumes.
- Turn-on trigger mode switch: Choose between GTO Signal Sense (DC offset) and audio sense to automatically power the line output converter or use remote 12V input for manual control.
- Dual variable stereo gain controls with clipping indicator: Allows you to adjust main and bass output signals from -12dB to +12dB and indicates when levels are optimal.
- Selectable on-board load resistors: Including 20 ohms, 60 ohms, and 20k ohms impedance for newer factory-amplified vehicles.
- Selectable ground isolation: Choose from common, ISO (default), or 200 ohms.
- Dash remote level control: The included ACR-1 remote is an attenuator knob that allows you to adjust the bass output level for your subwoofer.
- Slim chassis with integrated mounting brackets: Enables quick and easy installation.
- 5-year warranty: To protect against defects in materials and workmanship.
Product Manuals
Q: What is the maximum input voltage this device can handle?
A: The maximum input voltage the AudioControl converter can handle is 40 volts.
Q: What is the purpose of the AccuBASS feature on this device?
A: The AccuBASS feature restores bass frequencies on factory systems that roll off the bass as you increase volume.
Q: What is the maximum frequency response of this AudioControl converter?
A: The maximum frequency response of the AudioControl converter is 50 kilohertz.
Q: Does this device have adjustable output level control?
A: Yes, the AudioControl 2-Channel Active Line Output Converter has adjustable output level control.
Q: How many channels does the AudioControl converter have?
A: This AudioControl converter has 2 channels.
Q: What type of outputs does this converter have?
A: The AudioControl 2-Channel Active Line Output Converter uses RCA outputs.
A: This info is pulled from a database of information and cannot be relied upon. This item is compatible with Literally ANY factory system. This unit pulls signal from the speaker level outputs from the stock amplifier or the speaker wires. If your vehicle has speakers, this is compatible. I have used this in Lexus, Nissan, BMW, Toyota, Ford, Chevy, Mercedes, Audi. Its very close to impossible that this unit would not be compatible with your car, UNLESS your speakers are receiving more than 400 watts of power as that is the maximum power input for this converter.
Q: What wire will I need to hook this up to my vehicle?
A: Speaker wire 14-16 gauge RCA cables to run to amp Small line of single wire from lc2 to amp remote. And finally a wire for ground. You can use power from amp so minimal wire runs. With this device you can use it's option to use sound as it's on switch aka remote
Reviews
Customers are saying
Customers have good things to say about the 2-Channel Active Line Output Converter with AccuBASS and Subwoofer Control. Many customers highlight the outstanding sound quality and find the bass control to be a valuable feature. The product is also praised for its ease of use and straightforward installation process.
Customer Images
The vast majority of our reviews come from verified purchases. Reviews from customers may include My Best Buy members, employees, and Tech Insider Network members (as tagged). Select reviewers may receive discounted products, promotional considerations or entries into drawings for honest, helpful reviews.
Compare similar products
Easily add an aftermarket amplifier or subwoofer to your vehicle’s factory audio system with this 2-Channel Active Line Output Converter with AccuBASS and Subwoofer Control by AudioControl. The LC2i PRO converts speaker-level (high-level) audio signals to RCA preamp (low-level) signals so you can install an aftermarket amplifier or subwoofer without replacing your factory radio. This two-channel line output converter also features AccuBASS technology so you can turn up the volume without losing bass.
Easily add an aftermarket amplifier to your vehicle’s factory audio system with the LocPRO 4-Channel Line Output Converter by PAC. The LP6-4 converts speaker-level (high-level) audio signals to RCA preamp (low-level) signals so you can install an aftermarket amplifier without replacing your factory radio. This four-channel line output converter can also be used to retain your vehicle’s OEM amplified audio system when replacing the factory radio.
The Kicker KEYLOC is a 2-channel line-out converter with DSP processing that can detect, analyze, and correct the audio from your factory system, when adding aftermarket amplifiers. The KEYLOC's patent-pending KEY algorithm automatically detects and analyzes crossovers, EQ, time delay, and any all-pass filters present. It will then correct these various audio treatments, for the smoothest frequency response possible, and level-matches the left and right audio channels, giving you a clean, uncolored audio signal for your aftermarket amplifiers
Install a powerful aftermarket car amplifier with this four-channel KICKER smart radio interface. Support for up to 100W of input signal enables consistent performance and uninterrupted operation of high-power factory audio systems. This KICKER smart radio interface has a compact design for discreet placement and retains factory radio functions for seamless operation.
| Pros for AudioControl - 2-Channel Active Line Output Converter with AccuBASS and Subwoofer Control - Black | |||
|---|---|---|---|
| Sound Quality, Ease of use, Installation, Bass, Price | Sound Quality, Ease of use, Installation, Compatibility, Line Output | There were no pros for this product— | There were no pros for this product— |
| Cons for AudioControl - 2-Channel Active Line Output Converter with AccuBASS and Subwoofer Control - Black | |||
| There were no cons for this product— | RCA Jacks | There were no cons for this product— | There were no cons for this product— |
