Cable Leader - 16 AWG NEMA 5-15P to NEMA 5-15R Heavy-Duty Power Extension Cord, Grounded 13A/125V for PC, Monitor, Printer, UPS - Black

Powering a high-draw device — a server rack, space heater, window AC, or large appliance — and need more reach without risking a thin, overheating cord? This Cable Leader 14 AWG heavy-duty power extension cord delivers grounded NEMA 5-15 reach rated for the full 15A/125V (1875W). Built with thick 14 AWG conductors, a flexible SJT jacket, and fully molded 3-prong plugs for safe, reliable power under heavy load. Compatible with any device using a standard NEMA 5-15P plug — servers, PDUs, monitors, printers, UPS battery backups, AC units, and appliances — but it is not a surge protector or voltage converter. Rated 15A/125V (1875W max) for indoor use. Best for: heavy-gauge power extension to high-draw 120V equipment. Not for: outdoor wet locations, 240V appliances, or loads above 15A/1875W. UL and cUL listed, CSA approved, and RoHS compliant.

Running a switch, server or multi-PSU chassis on the thin cord that came in the box? This IEC C13 to C14 heavy duty power cord carries 15A at 250V on 14 AWG three-conductor copper, two gauge steps above the 10A 18 AWG cordset most equipment ships with, so the cable is never the weak link in the rack. The C14 male end goes into any free C13 outlet on a PDU, UPS or rack strip and the C13 female end goes onto the equipment inlet, adding reach without touching the cord already run to the wall. A flexible SJT jacket rated to 105C and fully molded connectors resist cracking where the cable meets the plug. Compatible with any device using a standard IEC 60320 C14 power inlet and any C13 outlet on a PDU, UPS or surge protector; six jacket colors let you tag A-side and B-side feeds on sight. UL Listed, RoHS compliant. Best for: high-draw rack equipment and long runs where voltage drop matters. Not for: wall outlets, or C19/C20 and C5/C7 equipment.

Need to move a rack device further from the PDU, or replace a cord that walked off with the last technician? This IEC C13 to C14 power extension cord puts a C14 male end into any free C13 outlet on a PDU, UPS or surge strip and presents a C13 female end to the equipment inlet, so you add reach without touching the cord already run to the wall. It is built on 18 AWG three-conductor copper with a flexible SJT jacket rated to 105C and carries 10A at 250V, matching the cord most C14-inlet equipment ships with. Fully molded connectors resist cracking where the cable meets the plug. Compatible with any device using a standard IEC 60320 C14 power inlet and any C13 outlet on a PDU, UPS or surge protector; six jacket colors let you tag A-side and B-side feeds on sight. UL Listed, RoHS compliant. Best for: extending or replacing a C13 to C14 cord on equipment drawing 10A or less. Not for: wall outlets, C19/C20 or C5/C7 equipment, or loads above 10A.