Cable Leader - 16 AWG NEMA 5-15P to NEMA 5-15R Heavy-Duty Power Extension Cord, Grounded 13A/125V for PC, Monitor, Printer, UPS - Black

Running a switch, server or multi-PSU chassis on the thin cord that came in the box? This IEC C13 to C14 heavy duty power cord carries 15A at 250V on 14 AWG three-conductor copper, two gauge steps above the 10A 18 AWG cordset most equipment ships with, so the cable is never the weak link in the rack. The C14 male end goes into any free C13 outlet on a PDU, UPS or rack strip and the C13 female end goes onto the equipment inlet, adding reach without touching the cord already run to the wall. A flexible SJT jacket rated to 105C and fully molded connectors resist cracking where the cable meets the plug. Compatible with any device using a standard IEC 60320 C14 power inlet and any C13 outlet on a PDU, UPS or surge protector; six jacket colors let you tag A-side and B-side feeds on sight. UL Listed, RoHS compliant. Best for: high-draw rack equipment and long runs where voltage drop matters. Not for: wall outlets, or C19/C20 and C5/C7 equipment.

Powering a high-draw device — a server rack, space heater, window AC, or large appliance — and need more reach without risking a thin, overheating cord? This Cable Leader 14 AWG heavy-duty power extension cord delivers grounded NEMA 5-15 reach rated for the full 15A/125V (1875W). Built with thick 14 AWG conductors, a flexible SJT jacket, and fully molded 3-prong plugs for safe, reliable power under heavy load. Compatible with any device using a standard NEMA 5-15P plug — servers, PDUs, monitors, printers, UPS battery backups, AC units, and appliances — but it is not a surge protector or voltage converter. Rated 15A/125V (1875W max) for indoor use. Best for: heavy-gauge power extension to high-draw 120V equipment. Not for: outdoor wet locations, 240V appliances, or loads above 15A/1875W. UL and cUL listed, CSA approved, and RoHS compliant.

This power cord extension adds reach to a power cable you already own, or connects equipment straight to a rack outlet. The fully molded IEC 60320 C14 male plug mates with any C13 outlet on a PDU, UPS, surge protector, or the C13 end of an existing wall cord, while the C13 female end fits any device with a standard C14 power inlet - desktop computers, servers, network switches, monitors, printers and scanners. As an IEC C13 power cord built on heavy-duty 16 AWG three-conductor copper with a flexible SJT jacket rated to 105C (221F), this 3-prong extension power cord carries 13A at 250V, a full amp step above the 10A 18 AWG cords normally supplied in the box. Fully molded strain relief at both ends resists cracking where the cable meets the connector. UL Listed. Best for: extending a C14-inlet device to a PDU or UPS in a rack, data center or workstation, and replacing a lost or worn power cord extender. Not for: wall outlets - this cord has no NEMA plug; and not for C5, C15 or C19 inlets, or equipment drawing more than 13A.