Main Content

Cable Leader - Cat 6 Ethernet Cable, Shielded STP Patch Cord, RJ45 24 AWG, for Router, Switch, Patch Panel & Server Rack - Blue

Model: C6113-XXXX
SKU: 13084721

Reviews coming soon

Sold & shipped by

About this product

This Cat 6 shielded Ethernet patch cable - also sold as a Cat6 LAN cable, internet cable or RJ45 network cord - moves Gigabit traffic over a 24 AWG stranded bare copper core tested to 550 MHz, well beyond the 250 MHz the Cat 6 standard asks for. Foil shielding wraps all four twisted pairs, so the run stays clean beside power cabling, inside metal racks and near motors or ballasts where unshielded cords pick up noise. Each RJ45 plug carries 50-micron gold-plated contacts wired to T568B, and a snagless molded boot shields the locking tab so it does not snap when the cable is pulled back out of a packed patch panel. Backward compatible with Cat 5e and ready for Cat6a ports. Compatible with Cisco, Netgear, TP-Link, Ubiquiti, Linksys, ASUS, Synology and QNAP hardware. Stocked in 1, 2, 3, 5, 6, 7, 10ft, 14, 15, 20, 25, 50 and 100 ft - short jumpers through long Ethernet cables between rooms. Measure the path the cable travels, not the straight line. Best for: structured wiring, server rooms and patch panels. Not for: in-wall runs, outdoors, or 10 Gigabit across a full 100 m.

Features
  • Shielded Cat 6, 550 MHz, 24 AWG Bare Copper

    Four twisted pairs of 24 AWG stranded bare copper - not copper-clad aluminum - tested to 550 MHz against the 250 MHz the Cat 6 standard requires. Carries 1 Gigabit Ethernet to 100 m and 10 Gigabit on short runs of roughly 55 m. RJ45 contacts are plated with 50 microinches of gold and wired straight through to T568B, so it drops into an existing structured-wiring plant without re-terminating anything.

  • Foil Shielding for Rooms Where Plain UTP Struggles

    The STP construction wraps all four pairs in foil, which is what separates this cable from an ordinary unshielded patch cord. It is the version to reach for when the run shares a tray with power cabling, passes through a metal rack, or sits near motors, fluorescent ballasts, welders or medical equipment - the places where crosstalk and electromagnetic interference show up as dropped packets rather than as a dead link.

  • Not For: In-Wall, Outdoor, or Full-Length 10 Gigabit

    Quick check. In a rack, patch panel, server room or workshop? Yes. Behind a router, switch, modem, NAS or wall jack? Yes. Permanently inside a wall or ceiling? No - that needs in-wall rated cable. Buried, or run outdoors and exposed to weather? No. Need 10 Gigabit across a full 100 m? No - choose Cat 6a. Works with Cisco, Netgear, TP-Link, Ubiquiti, Linksys, ASUS, Synology and QNAP gear, and with any standard RJ45 port.

  • Snagless Boot Keeps the Locking Tab From Snapping

    The most common way a patch cable dies is the little plastic release tab shearing off, and after that the plug will not stay seated. A molded snagless boot covers that tab so it does not catch on a cable bundle or a panel edge while you pull the cable back out. The same boot keeps the cord from tangling with its neighbours during moves, adds and changes.

  • Sample-Tested, and We Replace Failures Ourselves

    Cable Leader sample-tests each production run for continuity and correct T568B pin order before it ships. If a cable arrives dead or fails in service, Cable Leader handles the replacement directly - there is no need to work through a third party. Tell us the length and colour you received and we will send a replacement.

Specifications
  • Cable Length
    2 feet
    Networking Cable Type
    Cat 6
    Connector Type (End 1)
    RJ45
    Gender (End 1)
    Male
    Connector Type (End 2)
    RJ45
    Gender (End 2)
    Male
Sponsored

Reviews

This product doesn't have any reviews yet.

Compare similar products

Cable Leader - Cat 6 Ethernet Cable, Shielded STP Patch Cord, RJ45 24 AWG, for Router, Switch, Patch Panel & Server Rack - Blue
Cable Leader - Cat 6 Ethernet Cable, Shielded STP Patch Cord, RJ45 24 AWG, for Router, Switch, Patch Panel & Server Rack - Blue

This Cat 6 shielded Ethernet patch cable - also sold as a Cat6 LAN cable, internet cable or RJ45 network cord - moves Gigabit traffic over a 24 AWG stranded bare copper core tested to 550 MHz, well beyond the 250 MHz the Cat 6 standard asks for. Foil shielding wraps all four twisted pairs, so the run stays clean beside power cabling, inside metal racks and near motors or ballasts where unshielded cords pick up noise. Each RJ45 plug carries 50-micron gold-plated contacts wired to T568B, and a snagless molded boot shields the locking tab so it does not snap when the cable is pulled back out of a packed patch panel. Backward compatible with Cat 5e and ready for Cat6a ports. Compatible with Cisco, Netgear, TP-Link, Ubiquiti, Linksys, ASUS, Synology and QNAP hardware. Stocked in 1, 2, 3, 5, 6, 7, 10ft, 14, 15, 20, 25, 50 and 100 ft - short jumpers through long Ethernet cables between rooms. Measure the path the cable travels, not the straight line. Best for: structured wiring, server rooms and patch panels. Not for: in-wall runs, outdoors, or 10 Gigabit across a full 100 m.

Best Buy essentials™ - 10' Cat-6 Ethernet Cable - Blue

This 10 ft. Ethernet cable easily connects your computer to a cable/DSL modem or other network devices. Backed by Best Buy, we designed it for durability and efficiency. The cable has 24K gold-plated contacts for reliable signal transmission, and snag-free connectors help prevent clip damage for extra durability. A vibrant blue color helps color-code your cables, making connections a snap. Get the job done right with this Best Buy Essentials 10' Cat-6 Ethernet Cable.

Best Buy essentials™ - USB-C to Ethernet Adapter - White

The Best Buy essentials USB-C to Ethernet Adapter enables high-speed internet access to USB-C devices. Up to 1 Gbps high-speed data transfers and fast connectivity are ideal for gaming and improved web browsing. Backed by Best Buy, our plug-and-play technology ensures a simple and effortless connection. And a compact design makes this adapter easy to carry and take on the go.

Cable Leader - USB 3.0 USB-A to Micro-B SuperSpeed Cable, 5Gbps for External Hard Drive, Portable SSD, Enclosure - Black
5.0(1)

Did you lose the cable for your USB 3.0 external hard drive, or did the original one start dropping the connection? This Cable Leader USB 3.0 USB-A to Micro-B SuperSpeed cable is the standard replacement cable for almost every 2.5" portable USB 3.0 hard drive made in the last decade. The wider Micro-B SuperSpeed connector (looks like two stacked Micro-USB ports) plugs into your external drive; the standard USB-A end plugs into your computer. Supports full 5 Gbps SuperSpeed data transfer for fast backup, video editing, and large file copy. Built with double-shielded conductors and fully molded strain relief. Compatible with WD My Passport, Seagate Backup Plus / Expansion, Toshiba Canvio, Samsung portable SSDs, LaCie Rugged Mini, and most USB 3.0 portable hard drives. Best for: replacing a USB 3.0 portable hard drive cable. Not for: Micro-USB phones (different connector — use USB-A to Micro-USB cable). RoHS compliant.

Pros for Cable Leader - Cat 6 Ethernet Cable, Shielded STP Patch Cord, RJ45 24 AWG, for Router, Switch, Patch Panel & Server Rack - Blue
There were no pros for this productOverall Performance, Speed, Ease of use, Length, PriceOverall Performance, Ease of use, Speed, Ethernet, CompatibilityThere were no pros for this product
Cons for Cable Leader - Cat 6 Ethernet Cable, Shielded STP Patch Cord, RJ45 24 AWG, for Router, Switch, Patch Panel & Server Rack - Blue
There were no cons for this productLagHeatThere were no cons for this product

Specs

Be the first to ask a question.

We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.

No content
Sponsored