Cable Leader - Cat 6a Ethernet Cable, Shielded F/UTP Patch Cord, 10 Gigabit RJ45, for Server Rack, Switch & NAS - Blue

This Cat 6a Ethernet cable - also sold as a Cat6a LAN cable, internet cable or RJ45 network cord - runs high speed 10 Gigabit Ethernet up to 100 m over four twisted pairs of 24 AWG stranded bare copper rated to 500 MHz: a thicker conductor than the 26 AWG common at this price, and bare copper rather than copper-clad aluminum. A wired link removes the jitter and sudden drop-outs Wi-Fi introduces, which is why cabling a desk, console or streaming box is worth it even where wireless reaches. Each RJ45 plug carries 50-micron gold-plated contacts wired to T568B, and a snagless molded boot guards the locking tab behind a desk. Backward compatible with Cat 5e and Cat6. Compatible with Netgear, TP-Link, ASUS, Linksys, Eero, Ubiquiti, Synology and QNAP gear. Stocked in 3, 5, 7, 10ft, 14, 15, 20, 25, 50 and 100 ft - short desk jumpers through long Ethernet cables between rooms. Measure the path the cable travels, not the straight line. Best for: home offices, gaming setups, routers, modems and smart TVs. Not for: in-wall runs, outdoors, or electrically noisy rooms.

This Cat 6 shielded Ethernet patch cable - also sold as a Cat6 LAN cable, internet cable or RJ45 network cord - moves Gigabit traffic over a 24 AWG stranded bare copper core tested to 550 MHz, well beyond the 250 MHz the Cat 6 standard asks for. Foil shielding wraps all four twisted pairs, so the run stays clean beside power cabling, inside metal racks and near motors or ballasts where unshielded cords pick up noise. Each RJ45 plug carries 50-micron gold-plated contacts wired to T568B, and a snagless molded boot shields the locking tab so it does not snap when the cable is pulled back out of a packed patch panel. Backward compatible with Cat 5e and ready for Cat6a ports. Compatible with Cisco, Netgear, TP-Link, Ubiquiti, Linksys, ASUS, Synology and QNAP hardware. Stocked in 1, 2, 3, 5, 6, 7, 10ft, 14, 15, 20, 25, 50 and 100 ft - short jumpers through long Ethernet cables between rooms. Measure the path the cable travels, not the straight line. Best for: structured wiring, server rooms and patch panels. Not for: in-wall runs, outdoors, or 10 Gigabit across a full 100 m.

Wiring a crowded patch panel or switch where every millimetre counts? This Cable Leader non-booted Cat 6 Ethernet patch cable, also sold as a Cat6 LAN cable, internet cable or RJ45 network cord, drops the bulky boot so plugs sit side by side in high-density ports and air moves freely through the rack. It uses four twisted pairs of 24 AWG bare copper in a 6.2 mm PVC jacket, tested to 550 MHz, well beyond the 250 MHz the Cat 6 standard asks for, with 50-micron gold-plated RJ45 contacts. Compatible with any RJ45 port on Cisco, Netgear, TP-Link, Ubiquiti, Linksys, ASUS, Synology and QNAP gear. Carries high speed Gigabit Ethernet up to 100 m and fits any Cat 5e, Cat 6 or Cat 6a jack, Cat6 and Cat6a patch panels alike. Stocked in 6 inch to 100 ft lengths, including 3, 10, 25 and 50 ft, from short patch cables to long Ethernet cables between rooms. Best for: patch panels, network switches, server racks and structured cabling. Not for: cables unplugged often (no latch protection), plenum or riser runs, or outdoor use.