Crunch - CRA-1500.1 CRA Series 1500 Watt Mono Block Amplifier - Black/Gray
Reviews coming soon
About this product
Command precise volume in up to four independent zones on your boat or RV! This universal zone control distributes a stereo RCA signal from your media center/source unit to as many as four independent stereo RCA outputs. Max output means cleaner, better sound The built-in line driver delivers clean signal up to 8-volts to each channel so your amplifier is getting the cleanest signal possible. Higher input voltage into your amplifier allows you to set your gains lower and keep system noise down for the cleanest sound possible! Works with most any amp KXMARLC is compatible with any amplifier that features pre-amp level inputs, and it’s perfect for large, multi-amplifier systems where you want ultimate control over the boat or vehicle’s volume levels. Think of all the uses We believe you will find lots of ways to incorporate KXMARLC – adding level control in an enclosed cabin, independently controlling the level of your tower speakers on your wake boat, and many others not listed here. The point is… it’s flexible in terms of application. Features! Comes with a hide-away processor unit and a half-DIN remote zone controller The preamp section allows for lower gain settings, increased noise rejection, and better sound The large knobs provide the easiest way of adjusting individual zone level volumes Includes amp remote turn-on output Includes customizable labels for naming your zones Comes with all installation hardware, and the hardware required to surface- or flush-mount the remote zone controller Specifications Rated Output Per Channel, all channels driven (1kHz,14.4v DC, THD < 1%): 8v Frequency Response [Hz] (± 1dB): 20-20k Signal-to-Noise Ratio @ Rated Power [dB]: 100 Input Sensitivity (VAC): 4.0 - 0.125 Input Impedance [Ohm]: 10k Output Impedance [Ohm]: 100k
Key Feature
Monoblock Class D amplifier delivering up to 1500W max power (1 x 1500W @ 1Ω)
Key Feature
Variable low-pass crossover (40Hz–300Hz) with 12dB/octave slope and subsonic filter (10Hz–40Hz)
Key Feature
High-efficiency signal performance with 0.2–6V input sensitivity and 105.3 dBA signal-to-noise ratio
Key Feature
Built-in bass control with 0–12dB boost and included wired remote for on-the-fly adjustment
Key Feature
DC signal sense auto turn-on eliminates need for remote turn-on wire
- Amplifier ClassDNumber Of Channels1Bass BoostVariable
Reviews
This product doesn't have any reviews yet.
Compare similar products
Command precise volume in up to four independent zones on your boat or RV! This universal zone control distributes a stereo RCA signal from your media center/source unit to as many as four independent stereo RCA outputs. Max output means cleaner, better sound The built-in line driver delivers clean signal up to 8-volts to each channel so your amplifier is getting the cleanest signal possible. Higher input voltage into your amplifier allows you to set your gains lower and keep system noise down for the cleanest sound possible! Works with most any amp KXMARLC is compatible with any amplifier that features pre-amp level inputs, and it’s perfect for large, multi-amplifier systems where you want ultimate control over the boat or vehicle’s volume levels. Think of all the uses We believe you will find lots of ways to incorporate KXMARLC – adding level control in an enclosed cabin, independently controlling the level of your tower speakers on your wake boat, and many others not listed here. The point is… it’s flexible in terms of application. Features! Comes with a hide-away processor unit and a half-DIN remote zone controller The preamp section allows for lower gain settings, increased noise rejection, and better sound The large knobs provide the easiest way of adjusting individual zone level volumes Includes amp remote turn-on output Includes customizable labels for naming your zones Comes with all installation hardware, and the hardware required to surface- or flush-mount the remote zone controller Specifications Rated Output Per Channel, all channels driven (1kHz,14.4v DC, THD < 1%): 8v Frequency Response [Hz] (± 1dB): 20-20k Signal-to-Noise Ratio @ Rated Power [dB]: 100 Input Sensitivity (VAC): 4.0 - 0.125 Input Impedance [Ohm]: 10k Output Impedance [Ohm]: 100k
Get more performance out of your entire car audio system by choosing the right amplifier system, the Crunch 1000 Watt 2 Channel PowerDriveX Series Class A/B Car Amp. The exclusive model comes in a stunning blue that will enhance the performance of your ride. Unparalleled in quality, the Crunch 1000 Watt 2 Channel PowerDriveX Series is a low-noise pre-amplifier with low-level RCA inputs and outputs. Featuring a flexible installation process for an easy setup, this system allows the amp to run in 2 channels or bridge mono mode. With a rugged MOSFET pulse width modulation power supply, fully adjustable crossovers, and bass boost, this high-quality amplifier will always deliver the quality sounds you need. This system ensures high-quality sounds with minimal distortion. Take your car audio to the next level and enjoy listening to your favorite music with the PowerDriveX 100 Watt 2 Channel Exclusive Blue A/B Car Stereo Amplifier from Crunch.
The NVX VADM1 v2 Class D Monoblock Amplifier is engineered to deliver serious performance in a compact form factor. Capable of producing up to 600 watts RMS at 1 ohm, this amplifier is perfect for those tight installs where space is limited but big bass is non-negotiable. Whether you're upgrading a car, boat, UTV, or motorcycle, the VADM1v2 brings premium sound to any ride. With features like a variable low-pass filter (50–250Hz), subsonic filter (10–50Hz), and 0–18dB bass boost at 45Hz, you have complete control over your subwoofer's performance. Whether you're going for deep, smooth lows or punchy, aggressive bass, this amp adapts to your preferences. Designed with balanced differential RCA inputs and high-level inputs (adapter required), the VADM1v2 integrates seamlessly with aftermarket and factory head units alike. Its rugged 4-way protection circuit safeguards your investment, and the included wired remote bass knob lets you make quick sub level tweaks from the driver’s seat. From marine to motorsports applications, this amp is built tough, compact, and efficient. At just 6.49" x 3.3" x 1.48", it fits virtually anywhere while delivering the high-quality sound NVX is known for.
Give your car audio a huge bass upgrade with NDA15001, a monoblock car amplifier built for daily use at 1500W RMS. NVX N-Series amplifiers are designed with Class D efficiency and greater musical clarity without dealing with an overly complex build, making it ideal for kickstarting a custom audio upgrade.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Customers often buy these together
Crunch - CRW12D4 12 Inch MAX 4 Ohm Dual Voice Coil Car Subwoofer Speakers (2 Pack) - Black
$74.79The price was $81.12
More to consider
$84.99The price was $96.00
$139.99The price was $155.00
$169.99The price was $185.00
Top Deal$199.99The price was $219.99
Enjoy your ride Sponsored
Top Deal$169.99The price was $199.99
Top Deal$399.99The price was $479.99
Clearance$143.99The price was $179.99
Discover related products
Keep exploring
$43.99The price was $51.99
