DS18 Audio - FRP Monoblock Class D Car Amplifier with Remote Level Control, 1500W RMS at 1 Ohm - Red
Reviews coming soon
About this product
The FRP-1.5K/RD is a monoblock car amplifier from the DS18 FRP series, built as a Class D design. It delivers 1500 watts RMS at 1 ohms. Total harmonic distortion is rated at 0.5% with a signal-to-noise ratio of 90dB. A selectable Band-Pass crossover covers HP: 10Hz-2KHz / LP: 40Hz-20KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-12dB centered between 50Hz. A remote level control is included so you can adjust output from the driver seat. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Color
RedFeatures
1500W RMS Monoblock Car Amplifier
Delivers 1500 watts RMS at 1 ohms. Wire down to the lowest impedance your subwoofer allows to get the full rating, and set the gain to your speaker RMS to keep the signal clean.
Class D Car Amplifier Design
A Class D topology runs cooler and draws less current than a conventional amplifier at the same output, with rated efficiency of 92%. That means less strain on your electrical system and a smaller chassis for the same power.
Adjustable Crossover and Bass Boost
Onboard tuning includes a selectable Band-Pass crossover covering HP: 10Hz-2KHz / LP: 40Hz-20KHz and bass boost adjustable from 0-12dB centered between 50Hz. Send each channel only the frequencies it should play and dial in the low end without adding an external processor.
Protection Circuitry and Cooling
Built with thermal, over-load, dc output and short circuit output protection, so the amplifier shuts itself down before a wiring fault, a short or overheating can damage it or your speakers. That is what keeps monoblock amplifiers alive in daily-driven vehicles.
0.5% THD and 90dB Signal-to-Noise
Total harmonic distortion of 0.5% and a signal-to-noise ratio of 90dB mean the amplifier reproduces the signal it is given instead of adding hiss and distortion of its own, which matters most at high volume.
Specifications
- Amplifier ClassDNumber Of Channels1Bass BoostVariableBridgeableNo
Reviews
This product doesn't have any reviews yet.
Compare similar products
The FRP-1.5K/RD is a monoblock car amplifier from the DS18 FRP series, built as a Class D design. It delivers 1500 watts RMS at 1 ohms. Total harmonic distortion is rated at 0.5% with a signal-to-noise ratio of 90dB. A selectable Band-Pass crossover covers HP: 10Hz-2KHz / LP: 40Hz-20KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-12dB centered between 50Hz. A remote level control is included so you can adjust output from the driver seat. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
The FRP-3.5K/RD is a monoblock car amplifier from the DS18 FRP series, built as a Class D design. It delivers 3500 watts RMS at 1 ohms. Total harmonic distortion is rated at 0.5% with a signal-to-noise ratio of 83dB. A selectable Fixed Band-Pass crossover covers HP: 10Hz-2KHz / LP: 40Hz-20KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-12dB centered between 50Hz. A remote level control is included so you can adjust output from the driver seat. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Power Reference amplifiers are the durable, reliable and powerful workhorse of the Memphis line. These amplifiers provide impressive power and performance. The single sided terminal design allows for convenient and easy wire routing to your amplifier for a clean installation. The top mounted control panel can easily be accessed for adjustments to dial in the perfect performance from your Power Reference amplifier. FEATURES Extruded aluminum heatsink Signal sensing auto turn on Top mounted controls 12dB/octave butterworth crossovers LED light strip Hi/Low selectable inputs SPECIFICATIONS RMS Power 4Ω: 150W x 2 RMS Power 2Ω: 250W x 2 Bridged Mono @ 4Ω: 500W x 1 THD%: <1% Frequency Response: 10Hz-25KHz Dimensions (in): 9.7 x 7.3 x 2 Recommended Amp Kit: 4GKIT
Demand maximum power from your car’s audio system with the Altitude Series 800W Monoblock Class D Amplifier from AudioControl. The A800.1 combines premium engineered audio components and advanced technology to deliver over-the-top power with a sleek and modern aesthetic. Equipped with ParaBASS low frequency contouring and new features including Spike Mode and Valet Mode, this amplifier guarantees outstanding performance for any vehicle.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Customers often buy these together
KICKER - P-Series 4AWG 2-Channel Amplifier Power Kit - Dark Gray/Blue
Clearance$79.99The price was $99.99
Kenwood - DMX8710S 7" Wireless Carplay/ Android Auto, Bluetooth, HD Radio, Sirius/XM, HDMI, 2 Camera inputs, Maestro - Black
Top Deal$499.99The price was $549.99
More to consider
Enjoy your ride Sponsored
Clearance$399.99The price was $499.99
$189.99The price was $199.99
$279.99The price was $369.99
Keep exploring
$113.04The price was $149.99
$79.99The price was $83.99
