DS18 Audio - FRP Monoblock Class D Car Amplifier with Remote Level Control, 2500W RMS at 1 Ohm - Red
Reviews coming soon
About this product
The FRP-2.5K/RD is a monoblock car amplifier from the DS18 FRP series, built as a Class D design. It delivers 2500 watts RMS at 1 ohms. Total harmonic distortion is rated at 0.5% with a signal-to-noise ratio of 83dB. A selectable Fixed Band-Pass crossover covers HP: 10Hz-2KHz / LP: 40Hz-20KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-12dB centered between 50Hz. A remote level control is included so you can adjust output from the driver seat. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Color
RedFeatures
2500W RMS Monoblock Car Amplifier
Delivers 2500 watts RMS at 1 ohms. Wire down to the lowest impedance your subwoofer allows to get the full rating, and set the gain to your speaker RMS to keep the signal clean.
Class D Car Amplifier Design
A Class D topology runs cooler and draws less current than a conventional amplifier at the same output, with rated efficiency of 85.6%. That means less strain on your electrical system and a smaller chassis for the same power.
Adjustable Crossover and Bass Boost
Onboard tuning includes a selectable Fixed Band-Pass crossover covering HP: 10Hz-2KHz / LP: 40Hz-20KHz and bass boost adjustable from 0-12dB centered between 50Hz. Send each channel only the frequencies it should play and dial in the low end without adding an external processor.
Protection Circuitry and Cooling
Built with thermal, over-load, short circuit output and voltage input protection, so the amplifier shuts itself down before a wiring fault, a short or overheating can damage it or your speakers. That is what keeps monoblock amplifiers alive in daily-driven vehicles.
0.5% THD and 83dB Signal-to-Noise
Total harmonic distortion of 0.5% and a signal-to-noise ratio of 83dB mean the amplifier reproduces the signal it is given instead of adding hiss and distortion of its own, which matters most at high volume.
Specifications
- Amplifier ClassDNumber Of Channels1Bass BoostVariableBridgeableNo
Reviews
This product doesn't have any reviews yet.
Compare similar products

The FRP-2.5K/RD is a monoblock car amplifier from the DS18 FRP series, built as a Class D design. It delivers 2500 watts RMS at 1 ohms. Total harmonic distortion is rated at 0.5% with a signal-to-noise ratio of 83dB. A selectable Fixed Band-Pass crossover covers HP: 10Hz-2KHz / LP: 40Hz-20KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-12dB centered between 50Hz. A remote level control is included so you can adjust output from the driver seat. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.

Complete your car's sound system setup with the Hifonics Brutus Gamma Mono Super D Class Amplifier. This subwoofer amp delivers power efficiently and effectively to your subwoofers, speakers, and other output devices for a crisp sound with minimal distortion and heat.Control your sound with this car audio amp. This 4,000-watt amplifier sports a mono-only operation. You also can customize your sound with this car audio amp's variable electronic crossover and electronic equalizer capabilities.Made for efficient power performance, this car audio mono amplifier is rated @ 1 ohms - 1 channel x 4,000 watts; @ 2 ohms - 1 channel x 2,200 watts; @ 4 ohms - 1 channel x 1,100 watts. This monoblock amp uses Ultra-Fi MOSET output device technology and classic Hifonics aluminum construction for powerful sound, efficient cooling, and minimal distortion.All connections are secure with this car subwoofer amplifier. This amp features nickel-plated connectors and a molded connection terminal that's angled for easy access to all power, ground, and speaker connections.Pump up the sound with the Hifonics Brutus Gamma Mono Amplifier.

The GM-DX871 is a 1-channel subwoofer amplifier that can deliver up to 800 watts RMS to your subwoofer, providing powerful bass with a strong and heavy beat. CTA-2006 compliant, this highly efficient Class D amplifier offers impressive, high-quality power in a compact chassis. The speaker-level inputs allow you to install this amp in a factory system without RCA connections. The built-in low-pass filter lets you optimize the sound for your vehicle's interior. Additionally, a wired bass control remote enables you to easily adjust the amount of bass from the subwoofer output. The GM-DX871 amplifier uses high-current, high-grade electronic components and gold-plated RCA connections to ensure maximum performance.

The Lanzar 2 Channel Car Stereo Amplifier delivers an impressive 6,000 watts of peak power, providing high-quality sound and deep bass for your car audio system. This dual-channel, bridgeable amplifier is ideal for driving subwoofers and is equipped with MOSFET technology for high power efficiency and sound clarity. The subwoofer bass control allows you to fine-tune your bass response, ensuring optimal sound quality. Its durable design makes it perfect for both high-performance car audio systems and enhancing your listening experience.
| Pros for DS18 Audio - FRP Monoblock Class D Car Amplifier with Remote Level Control, 2500W RMS at 1 Ohm - Red | |||
|---|---|---|---|
| There were no pros for this product— | There were no pros for this product— | Sound Quality, Power, Size, Ease of use, Price | There were no pros for this product— |
| Cons for DS18 Audio - FRP Monoblock Class D Car Amplifier with Remote Level Control, 2500W RMS at 1 Ohm - Red | |||
| There were no cons for this product— | There were no cons for this product— | Heat | There were no cons for this product— |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.















































