DS18 Audio - GEN-XX 10" High Excursion Subwoofer with Double Stacked Magnet, 500W RMS Dual 4-Ohm
Reviews coming soon
About this product
The GEN-XX10.4DHE is a 10" car subwoofer from the DS18 GEN-XX series. It handles 500 watts RMS and uses dual voice coils at 4 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 1000 watts. The high-excursion motor and suspension let the cone travel farther for deeper low-frequency output. The motor uses a double stacked magnet assembly. Mounting requires a 9.14" cutout diameter and 6.14" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.
Woofer Size
10"Features
500W RMS / 1000W Peak Power Handling
Rated at 500 watts RMS and 1000 watts peak. Behind that rating: 2" voice coil on a black aluminum former wound with SV wire, a 136 oz ferrite motor and 25mm of one-way excursion. That is what lets a 10" cone move this much air without losing control.
Dual 4-Ohm Voice Coil
Dual voice coils let you wire multiple subwoofers in series or parallel to reach the final impedance your amplifier is stable at, which gives you room to grow the system later.
High-Excursion Motor for Deep Bass
The high-excursion motor and suspension allow the cone to travel farther than a conventional subwoofer, which moves more air and produces the low frequencies you feel rather than just hear. Give it a properly tuned sealed or ported enclosure to take advantage of it.
Fitment and Recommended Enclosure
This 10" subwoofer requires a 9.14" cutout diameter and 6.14" of mounting depth. Check these numbers against your enclosure before ordering: enclosure volume and tuning change the low-frequency response as much as the driver does.
Double Stacked Magnet
A double stacked magnet assembly increases motor force, which improves cone control at high power and helps the subwoofer stay accurate instead of getting loose and boomy when driven hard.
Specifications
- RMS Power500 wattsPeak Power Handling1000 wattsImpedance4 ohmsSensitivity84.6 decibelsDual Voice CoilsYesWoofer Size10"
Reviews
This product doesn't have any reviews yet.
Compare similar products
The GEN-XX10.4DHE is a 10" car subwoofer from the DS18 GEN-XX series. It handles 500 watts RMS and uses dual voice coils at 4 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 1000 watts. The high-excursion motor and suspension let the cone travel farther for deeper low-frequency output. The motor uses a double stacked magnet assembly. Mounting requires a 9.14" cutout diameter and 6.14" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.
The GEN-X104D is a 10" car subwoofer from the DS18 GEN-X series. It handles 400 watts RMS and uses dual voice coils at 4 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 800 watts. Mounting requires a 9.21" cutout diameter and 5.39" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.
The ZXI10.4D is a 10" car subwoofer from the DS18 ZXI series. It handles 800 watts RMS and uses dual voice coils at 4 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 1600 watts. The high-excursion motor and suspension let the cone travel farther for deeper low-frequency output. The motor uses a quad stacked magnet assembly. Mounting requires a 9.36" cutout diameter and 6.91" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.
Optimize your sound on every road trip or errand run with the 2-pack of Crunch 12-Inch 800-Watt Subwoofer Speakers. These car speakers are designed with durability and efficiency in mind to deliver quality, powered-up sound you'll love.This set of 12-inch cart stereo speakers pumps out 800 watts of MAX power and 400 watts of RMS power with a 4-ohm impedance, creating powerful sound to accompany you on your car adventures. The vented aluminum former holds a 2-inch voice coil and allows heat to be exchanged resulting in less heat distortion. Designed with a heavy-duty, powder-coated steel frame, these subs allow back venting for increased power handling and reliability. Spade-style terminals allow for easy installation and this automotive speaker set is versatile enough to be installed in a small or medium sealed enclosure or large vented enclosure. These sub speakers measure 12.25 inches in diameter with a 10.94-inch cutout and 5.61-inch mounting depth.Enjoy your music on every ride with the 2-pack of Crunch CRW12D4 12-Inch 800-Watt Subwoofer Speakers.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Customers often buy these together
KICKER - 51CWQ104 CompQ 10” 4-Ohm Subwoofer - Black
$254.99The price was $299.99
QPower - QBOMB12VL Single 12" Vented Ported Car Subwoofer Sub Box Enclosure QBOMB - Black
$82.99The price was $96.99
More to consider
$76.45The price was $81.12
Enjoy your ride Sponsored
Keep exploring
- $76.45The price was $81.12
