DS18 Audio - ION 1-Channel Class D Car Amplifier, 1200W RMS at 1 Ohm - Black/Silver
Reviews coming soon
About this product
The ION1200.1D is a 1-channel car amplifier from the DS18 ION series, built as a Class D design. It delivers 1200 watts RMS at 1 ohms, 800 watts RMS at 2 ohms and 400 watts RMS at 4 ohms. Total harmonic distortion is rated at 0.01% with a signal-to-noise ratio of greater than 95dB. A selectable Band-Pass crossover covers HP: 15Hz-1KHz / LP: 40Hz-20KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0~12dB centered between 45Hz. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Features
1200W RMS Monoblock Car Amplifier
Delivers 1200 watts RMS at 1 ohms, 800 watts RMS at 2 ohms and 400 watts RMS at 4 ohms. Wire down to the lowest impedance your subwoofer allows to get the full rating, and set the gain to your speaker RMS to keep the signal clean.
Class D Car Amplifier Design
A Class D topology runs cooler and draws less current than a conventional amplifier at the same output, with rated efficiency of 88%. That means less strain on your electrical system and a smaller chassis for the same power.
Adjustable Crossover and Bass Boost
Onboard tuning includes a selectable Band-Pass crossover covering HP: 15Hz-1KHz / LP: 40Hz-20KHz and bass boost adjustable from 0~12dB centered between 45Hz. Send each channel only the frequencies it should play and dial in the low end without adding an external processor.
Protection Circuitry and Cooling
Built with over-load, dc output, short circuit output and voltage input protection, so the amplifier shuts itself down before a wiring fault, a short or overheating can damage it or your speakers. That is what keeps 1-channel amplifiers alive in daily-driven vehicles.
0.01% THD and greater than 95dB Signal-to-Noise
Total harmonic distortion of 0.01% and a signal-to-noise ratio of greater than 95dB mean the amplifier reproduces the signal it is given instead of adding hiss and distortion of its own, which matters most at high volume.
Specifications
- Amplifier ClassDNumber Of Channels1Bass BoostVariableBridgeableNo
Reviews
This product doesn't have any reviews yet.
Compare similar products
The ION1200.1D is a 1-channel car amplifier from the DS18 ION series, built as a Class D design. It delivers 1200 watts RMS at 1 ohms, 800 watts RMS at 2 ohms and 400 watts RMS at 4 ohms. Total harmonic distortion is rated at 0.01% with a signal-to-noise ratio of greater than 95dB. A selectable Band-Pass crossover covers HP: 15Hz-1KHz / LP: 40Hz-20KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0~12dB centered between 45Hz. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
The ION600.1D is a 1-channel car amplifier from the DS18 ION series, built as a Class D design. It delivers 600 watts RMS at 1 ohms, 400 watts RMS at 2 ohms and 200 watts RMS at 4 ohms. Total harmonic distortion is rated at 0.01% with a signal-to-noise ratio of greater than 95dB. A selectable Band-Pass crossover covers HP: 15Hz-1KHz / LP: 40Hz-20KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0~12dB centered between 45Hz. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
The G4000.5D is a 5-channel car amplifier from the DS18 G series, built as a Class D design. It delivers 2 x 420 watts RMS at 4 ohms, 900 watts RMS at 1 ohms, 600 watts RMS at 2 ohms and 300 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. Total harmonic distortion is rated at 0.01% with a signal-to-noise ratio of greater than 90 dB. A selectable HPF/LPF crossover covers HPF:10-250Hz / LPF:50-250Hz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-12dB centered between Fixed @ 45Hz. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Street Reference amplifiers are the ultimate combination of performance, aggressive style and value. These powerhouses are capable of pushing the envelope without breaking the bank. Street Reference is the perfect choice for any entry to mid-level system. These amplifiers feature a sleek black aluminum textured finish with a brilliant LED accent. Features - • Textured aluminum heatsink • Selectable bass boost • Variable crossover network • Ultra-bright LED accent light strip • Remote level control included • Variable subsonic filter Specifications - • RMS POWER 4Ω: 550 x 1 • RMS POWER 2Ω: 950 x 1 • RMS POWER 1Ω: 1200 x 1 • THD % 4Ω: <1% • FREQ RESP: 16Hz – 250Hz • RECOMMENED AMP KIT: 4GKIT
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Customers often buy these together
MTX - TNE212D 12" 1200W Dual Loaded Car Subwoofer Package with 4 Gauge Wiring Kit - Black
$249.99The price was $269.95
More to consider
Enjoy your ride Sponsored
Keep exploring
$113.04The price was $149.99
$152.02The price was $160.18
$329.99The price was $349.99
