DS18 Audio - SXE 1-Channel Class D Car Amplifier, 500W RMS at 1 Ohm - Red
Reviews coming soon
About this product
The SXE-1500.1D/RD is a 1-channel car amplifier from the DS18 SXE series, built as a Class D design. It delivers 500 watts RMS at 1 ohms, 350 watts RMS at 2 ohms and 200 watts RMS at 4 ohms. Total harmonic distortion is rated at 0.05% with a signal-to-noise ratio of 90dB. A selectable Fixed LPF crossover covers 50-250Hz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-12dB centered between 45Hz. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Color
RedFeatures
500W RMS Monoblock Car Amplifier
Delivers 500 watts RMS at 1 ohms, 350 watts RMS at 2 ohms and 200 watts RMS at 4 ohms. Wire down to the lowest impedance your subwoofer allows to get the full rating, and set the gain to your speaker RMS to keep the signal clean.
Class D Car Amplifier Design
A Class D topology runs cooler and draws less current than a conventional amplifier at the same output, with rated efficiency of 80%. That means less strain on your electrical system and a smaller chassis for the same power.
Adjustable Crossover and Bass Boost
Onboard tuning includes a selectable Fixed LPF crossover covering 50-250Hz and bass boost adjustable from 0-12dB centered between 45Hz. Send each channel only the frequencies it should play and dial in the low end without adding an external processor.
Protection Circuitry and Cooling
Built with over-load, dc output, short circuit output and clipping protection, so the amplifier shuts itself down before a wiring fault, a short or overheating can damage it or your speakers. That is what keeps 1-channel amplifiers alive in daily-driven vehicles.
0.05% THD and 90dB Signal-to-Noise
Total harmonic distortion of 0.05% and a signal-to-noise ratio of 90dB mean the amplifier reproduces the signal it is given instead of adding hiss and distortion of its own, which matters most at high volume.
Specifications
- Amplifier ClassDNumber Of Channels1Bass BoostVariableBridgeableNo
Reviews
This product doesn't have any reviews yet.
Compare similar products
The SXE-1500.1D/RD is a 1-channel car amplifier from the DS18 SXE series, built as a Class D design. It delivers 500 watts RMS at 1 ohms, 350 watts RMS at 2 ohms and 200 watts RMS at 4 ohms. Total harmonic distortion is rated at 0.05% with a signal-to-noise ratio of 90dB. A selectable Fixed LPF crossover covers 50-250Hz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-12dB centered between 45Hz. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Street Edge amplifiers were designed to be affordable without sacrificing performance. The stripped down styling of these amplifiers allowed more resources to be dedicated to achieving solid performance with big power ratings at an affordable price point. Street Edge mono amplifiers were designed to be an affordable option to deliver big power to your subwoofer. FEATURES • Subsonic Filter • Remote Bass Knob (MONO only) • Variable Crossovers • Extruded Aluminum Heatsink SPECIFICATIONS: RMS POWER 4Ω: 330 x 1 RMS POWER 2Ω: 550 x 1 RMS POWER 1Ω: 800 x 1 THD% 4Ω: <1% FREQ RESPONSE: 10Hz – 200Hz DIMENSIONS L xW x H: 7.87 x 8.07 x 2 INPUT RANGE: 200mV – 8V AMP KIT: 4GKIT
The SXE-2500.1D/BK is a 1-channel car amplifier from the DS18 SXE series, built as a Class D design. It delivers 800 watts RMS at 1 ohms, 600 watts RMS at 2 ohms and 300 watts RMS at 4 ohms. Total harmonic distortion is rated at 0,05% with a signal-to-noise ratio of 90dB. A selectable Fixed LPF crossover covers 50-250Hz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0 - 18dB centered between 50Hz. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
The FRP-2.5K/TI is a monoblock car amplifier from the DS18 FRP series, built as a Class D design. It delivers 2500 watts RMS at 1 ohms. Total harmonic distortion is rated at 0.5% with a signal-to-noise ratio of 83dB. A selectable Fixed Band-Pass crossover covers HP: 10Hz-2KHz / LP: 40Hz-20KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-12dB centered between 50Hz. A remote level control is included so you can adjust output from the driver seat. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Customers often buy these together
More to consider
Enjoy your ride Sponsored
Keep exploring
$329.99The price was $349.99
$113.04The price was $149.99
$199.99The price was $209.99
