Skip to contentGo to Product Search
Main Content

DS18 Audio - SXE 1-Channel Class D Car Amplifier, 800W RMS at 1 Ohm - Black

Model: SXE-2500.1D/BK
SKU: 13159942

Reviews coming soon

Sold & shipped by

About this product

The SXE-2500.1D/BK is a 1-channel car amplifier from the DS18 SXE series, built as a Class D design. It delivers 800 watts RMS at 1 ohms, 600 watts RMS at 2 ohms and 300 watts RMS at 4 ohms. Total harmonic distortion is rated at 0,05% with a signal-to-noise ratio of 90dB. A selectable Fixed LPF crossover covers 50-250Hz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0 - 18dB centered between 50Hz. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.

Features

  • 800W RMS Monoblock Car Amplifier

    Delivers 800 watts RMS at 1 ohms, 600 watts RMS at 2 ohms and 300 watts RMS at 4 ohms. Wire down to the lowest impedance your subwoofer allows to get the full rating, and set the gain to your speaker RMS to keep the signal clean.

  • Class D Car Amplifier Design

    A Class D topology runs cooler and draws less current than a conventional amplifier at the same output, with rated efficiency of 80%. That means less strain on your electrical system and a smaller chassis for the same power.

  • Adjustable Crossover and Bass Boost

    Onboard tuning includes a selectable Fixed LPF crossover covering 50-250Hz and bass boost adjustable from 0 - 18dB centered between 50Hz. Send each channel only the frequencies it should play and dial in the low end without adding an external processor.

  • Protection Circuitry and Cooling

    Built with clipping, thermal, over-load and dc output protection, so the amplifier shuts itself down before a wiring fault, a short or overheating can damage it or your speakers. That is what keeps 1-channel amplifiers alive in daily-driven vehicles.

  • 0,05% THD and 90dB Signal-to-Noise

    Total harmonic distortion of 0,05% and a signal-to-noise ratio of 90dB mean the amplifier reproduces the signal it is given instead of adding hiss and distortion of its own, which matters most at high volume.

Specifications

  • Amplifier Class
    D
    Number Of Channels
    1
    Bass Boost
    Variable
    Bridgeable
    No
Sponsored

Reviews

This product doesn't have any reviews yet.

Compare similar products

DS18 Audio - SXE 1-Channel Class D Car Amplifier, 800W RMS at 1 Ohm - Black
DS18 Audio - SXE 1-Channel Class D Car Amplifier, 800W RMS at 1 Ohm - Black

The SXE-2500.1D/BK is a 1-channel car amplifier from the DS18 SXE series, built as a Class D design. It delivers 800 watts RMS at 1 ohms, 600 watts RMS at 2 ohms and 300 watts RMS at 4 ohms. Total harmonic distortion is rated at 0,05% with a signal-to-noise ratio of 90dB. A selectable Fixed LPF crossover covers 50-250Hz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0 - 18dB centered between 50Hz. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.

KICKER - CX 800W Class D Digital Mono Amplifier with Variable Low-Pass Crossover - Black

Create a custom sound experience with this KICKER CX-Series mono amplifier. The variable 12dB crossovers provide the control you need to get the exact sound you want, and the 24dB subsonic filter protects against damaging frequencies. With its small footprint and Fail-safe Integration Technology-PLUS, this KICKER CX-Series mono amplifier is easy to install and works with almost any radio.

DS18 Audio - GEN-X 4-Channel Class D Car Amplifier, 4 x 150W RMS at 4 Ohm - Black

The G1800.4D is a 4-channel car amplifier from the DS18 G series, built as a Class D design. It delivers 2 x 430 watts RMS at 4 ohms, 4 x 230 watts RMS at 2 ohms and 4 x 150 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. Total harmonic distortion is rated at 0.01% with a signal-to-noise ratio of greater than 90dB. A selectable LPF/FLAT/HPF crossover covers 50Hz-4KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from N/A centered between N/A. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.

Pioneer - GM-DX871 - 1-Channel Mono Class D Subwoofer Amplifier, 1600W Max, 800W RMS at 1 Ohm, Variable LPF, Wired Bass Remote - Black

The GM-DX871 is a 1-channel subwoofer amplifier that can deliver up to 800 watts RMS to your subwoofer, providing powerful bass with a strong and heavy beat. CTA-2006 compliant, this highly efficient Class D amplifier offers impressive, high-quality power in a compact chassis. The speaker-level inputs allow you to install this amp in a factory system without RCA connections. The built-in low-pass filter lets you optimize the sound for your vehicle's interior. Additionally, a wired bass control remote enables you to easily adjust the amount of bass from the subwoofer output. The GM-DX871 amplifier uses high-current, high-grade electronic components and gold-plated RCA connections to ensure maximum performance.

Pros for DS18 Audio - SXE 1-Channel Class D Car Amplifier, 800W RMS at 1 Ohm - Black
There were no pros for this product—Power, Sound Quality, Size, Ease of use, PriceThere were no pros for this product—Sound Quality, Power, Size, Ease of use, Price
Cons for DS18 Audio - SXE 1-Channel Class D Car Amplifier, 800W RMS at 1 Ohm - Black
There were no cons for this product—HeatThere were no cons for this product—Heat

Specs

Be the first to ask a question.

We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.

No content
Sponsored