DS18 Audio - X 2-Channel Class D Car Amplifier, 2 x 140W RMS at 4 Ohm - Black
Reviews coming soon
About this product
The X2 is a 2-channel car amplifier from the DS18 X series, built as a Class D design. It delivers 380 watts RMS at 4 ohms, 2 x 230 watts RMS at 2 ohms and 2 x 140 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. A selectable LPF/FLAT/HPF crossover covers 40Hz - 400Hz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from - centered between -. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Features
2 x 140W RMS 2-Channel Amplifier
Delivers 380 watts RMS at 4 ohms, 2 x 230 watts RMS at 2 ohms and 2 x 140 watts RMS at 4 ohms. Power scales as impedance drops, so check the rating at the impedance you plan to run before matching speakers.
Class D Car Amplifier Design
A Class D topology runs cooler and draws less current than a conventional amplifier at the same output, with rated efficiency of greater than 80%. That means less strain on your electrical system and a smaller chassis for the same power.
Bridgeable Channels for a Subwoofer
Bridge the channels to combine their output and drive a subwoofer or a pair of higher-power speakers from the same amplifier, which lets one amp cover both your speakers and your bass instead of buying two.
Adjustable Crossover and Bass Boost
Onboard tuning includes a selectable LPF/FLAT/HPF crossover covering 40Hz - 400Hz and bass boost adjustable from - centered between -. Send each channel only the frequencies it should play and dial in the low end without adding an external processor.
Protection Circuitry and Cooling
Built with thermal, over load, dc output and short circuit protection, so the amplifier shuts itself down before a wiring fault, a short or overheating can damage it or your speakers. That is what keeps 2-channel amplifiers alive in daily-driven vehicles.
Specifications
- Amplifier ClassDNumber Of Channels2Bass BoostFixedBridgeableYes
Reviews
This product doesn't have any reviews yet.
Compare similar products

The X2 is a 2-channel car amplifier from the DS18 X series, built as a Class D design. It delivers 380 watts RMS at 4 ohms, 2 x 230 watts RMS at 2 ohms and 2 x 140 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. A selectable LPF/FLAT/HPF crossover covers 40Hz - 400Hz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from - centered between -. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.

Experience unparalleled sound quality with compatibility for high-resolution audio sources, delivering rich detail, an expansive soundstage, and stunning realism. Engineered with high-performance operational amplifiers, the GM-DX104 minimizes noise in small-signal circuits to produce crystal-clear tones across a wide bandwidth. This compact amplifier also offers the flexibility to amplify 4, 3, or 2 speakers by bridging or not bridging the outputs, resulting in available power of 4x 45 watts RMS at 4 ohms or 90 watts RMS when bridged. Its compact, energy-efficient design and high-voltage compatibility ensure effortless installation in virtually any vehicle, making it the ultimate choice for audiophiles seeking exceptional performance and versatility.

The G4000.5D is a 5-channel car amplifier from the DS18 G series, built as a Class D design. It delivers 2 x 420 watts RMS at 4 ohms, 900 watts RMS at 1 ohms, 600 watts RMS at 2 ohms and 300 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. Total harmonic distortion is rated at 0.01% with a signal-to-noise ratio of greater than 90 dB. A selectable HPF/LPF crossover covers HPF:10-250Hz / LPF:50-250Hz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-12dB centered between Fixed @ 45Hz. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.

The G3600.4D is a 4-channel car amplifier from the DS18 G series, built as a Class D design. It delivers 2 x 740 watts RMS at 4 ohms, 4 x 420 watts RMS at 2 ohms and 4 x 300 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. Total harmonic distortion is rated at 0.01% with a signal-to-noise ratio of greater than 90dB. A selectable LPF / FLAT / HPF crossover covers 50Hz-4KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from N/A centered between N/A. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.



































