DS18 Audio - GEN-X 2-Channel Class D Car Amplifier, 2 x 100W RMS at 4 Ohm - Black
Reviews coming soon
About this product
The G700.2D is a 2-channel car amplifier from the DS18 G series, built as a Class D design. It delivers 360 watts RMS at 4 ohms, 2 x 180 watts RMS at 2 ohms and 2 x 100 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. Total harmonic distortion is rated at 0.0001 with a signal-to-noise ratio of greater than 90dB. A selectable LPF/FLAT/HPF crossover covers 50Hz-2KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-12dB centered between Fixed @ 45Hz. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Features
2 x 100W RMS 2-Channel Amplifier
Delivers 360 watts RMS at 4 ohms, 2 x 180 watts RMS at 2 ohms and 2 x 100 watts RMS at 4 ohms. Power scales as impedance drops, so check the rating at the impedance you plan to run before matching speakers.
Class D Car Amplifier Design
A Class D topology runs cooler and draws less current than a conventional amplifier at the same output, with rated efficiency of 0.94. That means less strain on your electrical system and a smaller chassis for the same power.
Bridgeable Channels for a Subwoofer
Bridge the channels to combine their output and drive a subwoofer or a pair of higher-power speakers from the same amplifier, which lets one amp cover both your speakers and your bass instead of buying two.
Adjustable Crossover and Bass Boost
Onboard tuning includes a selectable LPF/FLAT/HPF crossover covering 50Hz-2KHz and bass boost adjustable from 0-12dB centered between Fixed @ 45Hz. Send each channel only the frequencies it should play and dial in the low end without adding an external processor.
Protection Circuitry and Cooling
Built with thermal, over-load, dc output and short circuit output protection, so the amplifier shuts itself down before a wiring fault, a short or overheating can damage it or your speakers. That is what keeps 2-channel amplifiers alive in daily-driven vehicles.
Specifications
- Amplifier ClassDNumber Of Channels2Bass BoostVariableBridgeableYes
Reviews
This product doesn't have any reviews yet.
Compare similar products
The G700.2D is a 2-channel car amplifier from the DS18 G series, built as a Class D design. It delivers 360 watts RMS at 4 ohms, 2 x 180 watts RMS at 2 ohms and 2 x 100 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. Total harmonic distortion is rated at 0.0001 with a signal-to-noise ratio of greater than 90dB. A selectable LPF/FLAT/HPF crossover covers 50Hz-2KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-12dB centered between Fixed @ 45Hz. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Upgrade your sound system with this compact Kenwood 4-channel amplifier. It delivers 400W total power for crisp, clear tones, and the conformal-coated circuit board keeps out moisture and salt for safe use in both land and water vehicles. This compact Kenwood 4-channel amplifier is easy to install in tight spaces for added versatility.
Take your Stinger car audio to the next level with the MT Series by Stinger Audio: sleek, compact multi-channel amplifiers designed to integrate into any vehicle sound system. Harnessing the power of Class D circuitry, these amplifiers efficiently drive your speakers, producing clarity and vibrancy in sound reproduction. Utilizing advanced MOSFET technology alongside top-tier capacitors, transformers, and cutting-edge inductors, our amplifiers deliver a sonic experience that transcends expectations.
The X2 is a 2-channel car amplifier from the DS18 X series, built as a Class D design. It delivers 380 watts RMS at 4 ohms, 2 x 230 watts RMS at 2 ohms and 2 x 140 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. A selectable LPF/FLAT/HPF crossover covers 40Hz - 400Hz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from - centered between -. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
| Pros for DS18 Audio - GEN-X 2-Channel Class D Car Amplifier, 2 x 100W RMS at 4 Ohm - Black | |||
|---|---|---|---|
| There were no pros for this product— | Sound Quality, Power, Size, Ease of use, Installation | There were no pros for this product— | There were no pros for this product— |
| Cons for DS18 Audio - GEN-X 2-Channel Class D Car Amplifier, 2 x 100W RMS at 4 Ohm - Black | |||
| There were no cons for this product— | Heat | There were no cons for this product— | There were no cons for this product— |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Customers often buy these together
More to consider
$79.99The price was $91.62
Clearance$399.99The price was $499.99
Enjoy your ride Sponsored
Keep exploring
$153.75The price was $160.18
$249.99The price was $259.99
