Fractal Design - North Charcoal Black with Walnut Front and Mesh Side Panel Mid-Tower PC Case - Black

Nice wood finish. Came with 2 fans and every accessories.

Coming from a nzxt h6 and a meshify from years ago I had high expectations considering all the reviews were so positive. I tried to build it and got stuck at a few spots and didn't end up finishing. Some my fault some on the case. Pros: it looks like the photos. Very light. Reviews are overwhelmingly positive. Fans drawing air in from the mesh panel is a nice idea. (You will need to buy fans) Cons: felt light and cheap. Not all the seems like up. Front cover feels cheap like it could break any time. Opposite of my nzxt experiences. It comes with 3 front 140 fans only. And they aren't even that good. Even tho a lot of people use the liquid freezer 3 360 on this I don't recommend it. It will barely fit front mount and with the tubes down. You'll need longer radiator screws to use 140mm fans. The radiator will have to go on the inside of the bracket and the fans on the outside. There will be a gap. This is probably not an issue but not ideal. Even with 120 fans any stock radiator screw is going to feel a little short. I tried the lf3 front mount with a ASRock 7900xtx and it's too long. The lf3 radiator is about 5mm thicker than most and the Asus card is a little long. Also you have to angle the card it and it will be difficult to straighten with a front mount radiator. This case should be air cooler or 240mm AIO only. You will need at least 4 more fans. Or replace all. I would replace all since artic fans are so inexpensive. Cable management isn't great or even good at all. I didn't think nzxt was that good until I tried this case. There should be another set of ties down the middle of the for your GPU cable routing to the PSU and even fan routing. Maybe the thermals are great? And it makes up for all this.

The side mesh really is good for airflow. The case is well built and looks very nice. The wife really likes it. It can be tight to fit everything in if you have a big gpu like the xfx 7900xtx fits inside but it is tight with the side fan bracket that goes under where the side panel mesh is. But it does work. No real complaints when building in the case either. I would go with the XL if I was to buy again though as I worry with the way gpu sizes keep increasing that the case will need to be changed out when I get her a new gpu someday/upgrade the computer next as card length is pretty short for most of the big gpus.

This case is great, lots of airflow, the wood paneling and brass feet/buttons look cool and the inside is plenty big for all the parts. The only downside I found was my power supply was slightly too big which meant only one hdd fit properly but honestly that’s not that bad.

This case is fantastic and light weight. There are no glass panels to break. The top and side panels are perforated for air flow and are easy to remove. The wood accents on the front panel are classy. It comes in a high quality box with foam padding that you can ship anywhere. This is a great mid size case. Highly recommended.