HQRP - 4-Pack Foam Pre-Filter Inserts for Tetra Pond FK3 26594 Fountain Kit, Replacement 19016

This 4-pack aquarium bio sponge foam filter block set provides mechanical filtration by capturing large particles and debris while maintaining efficient water flow with less clogging for long-lasting performance. Compatible with Fluval 204 / 205 / 206 / 304 / 305 / 306 aquarium filters and replacement for Fluval A222 / EGB41S-1GFT1052, these foam inserts install quickly to refresh your canister filter in freshwater or marine tanks. Rinse foam thoroughly with water from the aquarium before inserting, then clean monthly and replace about every 6 months to help keep water clear and your aquatic pets in a healthier habitat. Disclaimer: This is not an Original Equipment Manufacturer (OEM) product, HQRP branded product is a replacement. All brand names and logos are registered trademarks of their respective owners. Any use of the brand names or model designations for this product are made solely for purposes of demonstrating compatibility.

Replacement 30 ppi foam filter pad set designed to remove fine debris and small waste particles as the 2nd step of mechanical filtration, helping keep aquarium water cleaner and clearer. Compatible with API Rena Filstar xP / XP-1 / XP-2 / XP-3 / XP-4 / XPS / XPM / XPL / XPXL aquarium canister filters. The open-cell foam structure traps sediment, uneaten food, decaying matter and fish waste while allowing water to flow freely for consistent circulation and reduced clogging, and it can also support biological filtration. Each pad measures 6 1/4 in x 6 1/4 in x 3/4 in. For proper installation, place the pads in the bottom filtration compartment above the 20 ppi foam pad. Rinse thoroughly before inserting, rinse using water from the aquarium, and do not replace all filter media simultaneously. Pads should be cleaned about monthly and replaced about every 3 months for ongoing filtration performance in freshwater or saltwater setups. Disclaimer: This is not an Original Equipment Manufacturer (OEM) product, HQRP branded product is a replacement. All brand names and logos are registered trademarks of their respective owners. Any use of the brand names or model designations for this product are made solely for purposes of demonstrating compatibility.

These replacement coarse and fine pre-filter pads are compatible with Sunterra 320106 / 337106 pond pre-filter box and are designed to keep your filtration system working efficiently in outdoor water features. Each set includes a coarse pad to catch larger debris such as leaves, stones, muck, and sticks, plus a fine pad to capture smaller particles that can restrict flow. Using a pre-filter is a cost-effective way to protect pond pumps, help them run more efficiently, reduce stress on the pump impeller, and extend pump life compared with running without a pre-filter. Made from durable filter sponge in a rectangular shape with an easy punch-in center hole, these pads install quickly by swapping them inside the pre-filter box. The pack includes 4 complete sets to support routine maintenance and helps reduce clogging for steadier water flow in small ponds, fish ponds, outdoor aquariums, fountains, filtration systems, and pump filter boxes; replace pads about once per year for optimal pond health. Disclaimer: This is not an Original Equipment Manufacturer (OEM) product, HQRP branded product is a replacement. All brand names and logos are registered trademarks of their respective owners. Any use of the brand names or model designations for this product are made solely for purposes of demonstrating compatibility.