HQRP - Non-Fusible AC Disconnect Switch Pull-Out, 60 Amp 120/240 VAC, Outdoor Type 3R Metal Enclosure - Gray

This fused A/C disconnect switch provides a safe, visible means to shut off power at the equipment during service and maintenance. Built in a durable rainproof Type 3R metal enclosure for outdoor installation, it is commonly installed in visible proximity to an air conditioner condensing unit in residential and light commercial applications, and is also used with heat pumps, swimming pools, and pump houses. The pull-out handle delivers straightforward ON/OFF control and can be stored inside the compartment in the OFF position to help prevent misplacement. Rated 60 A at 120/240 VAC with a 1-phase, 3-wire, 2-pole configuration, it supports a wide range of AC disconnect needs. UL Listed. Note: Fuse is not included; a fuse mounting position is provided inside the unit and the fuse must be purchased and installed separately. A protective shield cannot be removed until the pull-out handle is removed, disconnecting the power. Disclaimer: This is not an Original Equipment Manufacturer (OEM) product, HQRP branded product is a replacement. All brand names and logos are registered trademarks of their respective owners. Any use of the brand names or model designations for this product are made solely for purposes of demonstrating compatibility.

This fused A/C disconnect switch is designed to provide a safe, visible means of power interruption for HVAC equipment during service, maintenance, or emergency shutoff. Built in a durable metal enclosure and UL Listed, it supports 120/240 VAC operation at 30 A with a 1-phase, 3-wire, 2-pole design. The pullout handle provides simple ON/OFF control and can be stored in the compartment in the OFF position to help prevent misplacement while offering clear visual confirmation of disconnection. A protective shield cannot be removed until the pullout handle is removed, helping reduce accidental contact with energized components. The Type 3R rainproof enclosure is intended for outdoor installation in visible proximity to equipment and is commonly used compatible with residential and light commercial air conditioner condensing units / heat pumps / swimming pool pumps / pump houses. Note: This unit includes an internal fuse mounting position, but the fuse is not included and must be purchased and installed separately. Disclaimer: This is not an Original Equipment Manufacturer (OEM) product, HQRP branded product is a replacement. All brand names and logos are registered trademarks of their respective owners. Any use of the brand names or model designations for this product are made solely for purposes of demonstrating compatibility.

A double pole 2 pole condenser contactor designed to restore reliable switching in HVAC outdoor condenser units and other 24 V AC controlled loads. Rated 40 A with a 24 V AC coil, it helps address common failure symptoms such as intermittent cooling, contact chatter, overheating, or a condenser that will not engage. Built with silver-coated copper contact material, weld-resistant silver cadmium oxide contacts, and a reinforced thermoset polyester housing to support quiet, stable operation in residential and light commercial systems. Compatible with Siemens 45GG20AJ / Eaton C25BNB240T / Cutler Hammer C25BNB240T / GE CR453CE2HBB / Tyco 3100Y20Q18999CL / 8910DP42V14 / Carrier HN52TC024 / 38AUZ-08A0-6-0A / HN52KC024 / 30EB-030-300 / HN52PD024 / 213RNA060000BAAA; replacement for C240A. Disclaimer: This is not an Original Equipment Manufacturer (OEM) product, HQRP branded product is a replacement. All brand names and logos are registered trademarks of their respective owners. Any use of the brand names or model designations for this product are made solely for purposes of demonstrating compatibility.