JBL - CruiseX Power Sports Bluetooth Audio System - Black

The Gen 3 GoHawk Stereo Soundbar System comes with new 7/8" to 1-1/4" mounting clamps and mirror brackets, with custom mounting required for bars larger than 1-1/4". Only the speakers are waterproof; the amplifier is not and should be installed in a shaded area away from rain and direct sunlight, as it is normal for the amp to warm during use. Features include Bluetooth wireless, 3.5mm AUX input, USB 2.0, microSD slot, FM radio, LED back-lit wired control, and a display with clock. FM specs cover 87–108MHz with sensitivity ≤11dB, distortion ≤0.5%, and SNR ≥60dB. General specs include a black amplifier rated at 12V DC, 2 × 30W input, 180W max, 4–8Ω impedance, Bluetooth 3.0+EDR with >15m range, and frequency response of 20Hz–20KHz. Dimensions are 3.38" × 4" for speakers, 3.25" × 4.5" × 2" for the stereo unit, and 1.5" × 2" for the wired control. The package includes 4 speakers, main control unit, wired control, 4 handlebar clamps, 4 mirror mounting brackets, installation accessories, and a user manual.

JBL RALLYBAR XL is a IP66 rated water resistant Bluetooth® Soundbar with 300Wrms amplifier, extraordinary sound experience and unique dynamic LED lights to UTVs, golf carts, boats and other vehicles built for recreation. Each RALLYBAR XL can be used by itself or connected to multiple RALLYBAR XL or RALLYBAR XL family products (RALLYBAR, RALLYBAR S and RALLYBAR XL) by using its built-in broadcast mode. The innovative mounting kits design (patent pending) offers multiple position combinations on top and back to accommodate a variety of installation requirements. Bluetooth®, USB disk and Aux-in audio players are supported. HI-Resolution Audio for AUX-IN input audio source is available.

Alpine brings its legacy of premium sound performance off-road with this complete, plug-and-play, 9-speaker audio system for 2013+ Polaris RZR. Features - Complete Weather-Resistant Sound System Kit for 2013-up Polaris® RZR® Side-By-Sides - Clean, balanced sound tuning designed for music, not just maximum loudness - Sealed 10” sub enclosure delivers tight, accurate bass and protects performance in wet and dusty environments - Plug-and-play installation with vehicle-specific mounting, wiring, and integration harness included - Factory-style fit & finish with vehicle-specific mounts and a clean integrated look - True full-system weather protection: IPX66-rated receiver, amps, and speaker cans, plus an IPX7-rated sealed sub enclosure - Includes KAC-CMD-CTR 4.3” Digital Media Receiver with full color display - Bluetooth® hands-free calling + wireless audio streaming - USB + AUX inputs for flexible music playback - 600W RMS of real amplifier power for clarity, volume, and controlled bass at speed - Integrated RGB lighting on rear speaker pods with 10 colors + 4 dynamic modes via included dash-ready switch - Models with Polaris® Ride Command require KTX-RZR-LRB head unit lower mounting bracket (sold separately) Tech Specs - Digital Media Receiver: KAC-CMD-CTR with 4.3” full color display; IPX66-rated - Subwoofer Enclosure: 10” sealed, preloaded; 300W RMS / 600W Peak; IPX7-rated - Speaker Cans: SPV-65RGB-CAN; 90W RMS / 225W Peak; IPX66-rated - Speaker Can Mounting: adjustable brackets for 1.75”–2” roll cage bars - Mono Amplifier: KTA-30MW; 300W RMS (up to 600W with Alpine Dynamic Peak Power D.P.P.); IPX66-rated - 4-Channel Amplifier: KTA-30FW; 75W RMS x 4; IPX66-rated - Total Amplifier Power: 600W RMS - Lighting: Rear pod RGB with 10 static colors + 4 dynamic modes via included switch - Connectivity: Bluetooth® streaming + hands-free calling; USB and AUX input - Kit includes vehicle-specific brackets, wiring kit, antenna, USB/AUX port, RGB switch, and hardware