MB Quart - NA4-400.1 Nautic 400 Watt Waterproof Monoblock Amplifier 200x1 @ 4OHM, 400x1 @ 2OHM - Black/Gray
Reviews coming soon
About this product
MB Quart NA4-400.1 Nautic compact 400 watt mono powersports subwoofer amplifier with waterproof potted internals and quick release connectors. Features: Compatible Vehicle Fitment Universal Low Noise Preamplifier Circuit The highly engineered Q-Stasis pre-amplifier stage reduces incoming noise from source units dramatically improving sound quality. RCA Inputs 1 pair high temperature impact resistant nickel-plated RCA inputs that allow for secure connections and are corrosion resistant. Operation Mode Mono operation Crossover Type Dial LPF: Complete control of amplifier signal, essential when using two or more amplifiers. Class / Topology Full Range Class D: Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink. Output Device Technology PWM MOSFET Power Supply: Stable power through the PC board with minimal heat generation. Heat Sink Aluminum: Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration. Power Supply Simpatico Coil Design: The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices. Bass Remote Included Included: Wired Bass Remote allows adjustments to gain level to be made from the control mounted anywhere in the vehicle. Specifications: IPX Rating: IP67 Compatible Vehicles: Universal Amp Class: Full Range Class D Amp Total Channels: Mono Amp Max Power (watts): 400 Amp Power @ 2 Ohms (ch x watts): 1 x 400 Amp Power @ 4 Ohms (ch x watts): 1 x 200 Amp Crossover: Electronic Amp Variable Low Pass Crossover 12dB per Octave: 50Hz-150Hz Amp Bass Boost: 0-12dB Amp Subsonic Filter: 15Hz-50Hz Amp Variable Voltage: 0.2-9V Amp Signal to Noise: > 100dB Amp Frequency Response: 17Hz-165Hz Amp Total Harmonic Distortion (THD): 1.0% Amp Speaker Level Audio Inputs: RCA Amp Power Terminal 12v/GND: 12 AWG Quick Connector Amp Speaker Terminal Wire Gauge: Molex Plug Connector Amp Fusing: 30A x 1
Features
Key Feature
Compact mono Class D amplifier delivering 400W max power output
Key Feature
1 x 400W @ 2Ω and 1 x 200W @ 4Ω power ratings
Key Feature
IP67-rated waterproof design with fully potted internals for marine and powersports use
Key Feature
Variable low-pass crossover (50–150 Hz), subsonic filter (15–50 Hz), and bass boost (0–12 dB)
Key Feature
High signal-to-noise ratio (>100 dB) with low-noise Q-Stasis preamp circuit
Specifications
- Amplifier ClassDNumber Of Channels1Bass BoostVariable
Reviews
This product doesn't have any reviews yet.
Compare similar products

MB Quart NA4-400.1 Nautic compact 400 watt mono powersports subwoofer amplifier with waterproof potted internals and quick release connectors. Features: Compatible Vehicle Fitment Universal Low Noise Preamplifier Circuit The highly engineered Q-Stasis pre-amplifier stage reduces incoming noise from source units dramatically improving sound quality. RCA Inputs 1 pair high temperature impact resistant nickel-plated RCA inputs that allow for secure connections and are corrosion resistant. Operation Mode Mono operation Crossover Type Dial LPF: Complete control of amplifier signal, essential when using two or more amplifiers. Class / Topology Full Range Class D: Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink. Output Device Technology PWM MOSFET Power Supply: Stable power through the PC board with minimal heat generation. Heat Sink Aluminum: Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration. Power Supply Simpatico Coil Design: The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices. Bass Remote Included Included: Wired Bass Remote allows adjustments to gain level to be made from the control mounted anywhere in the vehicle. Specifications: IPX Rating: IP67 Compatible Vehicles: Universal Amp Class: Full Range Class D Amp Total Channels: Mono Amp Max Power (watts): 400 Amp Power @ 2 Ohms (ch x watts): 1 x 400 Amp Power @ 4 Ohms (ch x watts): 1 x 200 Amp Crossover: Electronic Amp Variable Low Pass Crossover 12dB per Octave: 50Hz-150Hz Amp Bass Boost: 0-12dB Amp Subsonic Filter: 15Hz-50Hz Amp Variable Voltage: 0.2-9V Amp Signal to Noise: > 100dB Amp Frequency Response: 17Hz-165Hz Amp Total Harmonic Distortion (THD): 1.0% Amp Speaker Level Audio Inputs: RCA Amp Power Terminal 12v/GND: 12 AWG Quick Connector Amp Speaker Terminal Wire Gauge: Molex Plug Connector Amp Fusing: 30A x 1

The MB Quart NA4-320.4 Nautic amplifier is engineered to deliver reliable, high-efficiency performance in demanding marine and powersports environments. Designed with a compact footprint and rugged construction, this 4-channel Class D amplifier produces 160 watts of RMS output, making it ideal for powering full-range speaker systems in outdoor vehicles. Built to meet IP67 standards, the NA4-320.4 is fully waterproof and dustproof, ensuring dependable operation in wet and harsh conditions. Its potted internal circuitry provides an added layer of protection by sealing sensitive components against moisture, vibration, and corrosion. This design significantly enhances long-term durability and system reliability where traditional amplifiers would fail. Performance is equally prioritized with MB Quart’s Q-Stasis low-noise preamp circuit, which minimizes unwanted signal interference and improves overall audio clarity. The amplifier also features a highly efficient PWM MOSFET power supply with Simpatico coil design, maintaining stable voltage while reducing heat buildup. A fixed 80Hz high-pass crossover allows for proper speaker protection and system tuning, while the wide 0.2V–9V input sensitivity ensures compatibility with a variety of source units. Installation is streamlined thanks to quick-connect power, speaker, and RCA terminals, along with nickel-plated, corrosion-resistant connections that maintain signal integrity over time. Integrated protection circuitry monitors thermal, overload, DC, and short conditions, providing peace of mind during extended use. Specifications: Type: 4-Channel Class D Amplifier Max Power: 320 Watts Power @ 2 Ohms: 4 x 80W Power @ 4 Ohms: 4 x 40W Frequency Response: 13Hz – 29kHz Signal-to-Noise Ratio: >95dB Total Harmonic Distortion: 1.0% Input Sensitivity: 0.2V – 9V Crossover: Fixed High-Pass 80Hz Inputs: 2 Pair RCA Power Connection: 12 AWG Quick Connector Speaker Connection: Molex Plug Connector Fusing: 30A x 1 IP Rating: IP67

The XL series was developed for the growing Power Sports market including UTV and Marine applications, where electronics must withstand harsh damp environments. The circuit boards have been conformal coated with a layer of transparent material that protects the parts against moisture, dust and extreme temperatures. These ultra small weather resistant amplifiers are ideal for all types of outdoor audio applications such as motorcycles, golf carts and off road vehilces. But the small size also makes these amps a great choice anywhere space is a premium. Utilizing the latest class D circuit design these amplifiers may be small on size but they are big on power and have a much lower current draw compared to other amplifiers with similar power output. The wrap around aluminum heatsink keeps everything running cool. Extremely versatile, each model gives you're a choice of low level RCA input or 3.5mm (1/8") mini-pug Aux Input. The Aux Input allows for easy connection of portable devices such as an iPod, MP3 player or smartphone to become your source unit. Features - • 400 Watt High Efficiency Class D Design • 2-Ohm Stable Mono Block Amplifier • Ultra Low Current Draw • Double Sided Copper Plated PCB • Flipped Conformal Coated PC Board • PWM MOSFET Power Supply • Digital Sound Optimization Circuitry • High Damping Control Circuit • Variable Subsonic Filter • High Current Voltage Ripple Rejection Circuitry • 3.5mm AUX Input • Remote Soft Delay Turn On/Off Circuit • Variable Low Pass Electronic Crossover • Variable 12dB Bass Boost EQ • Variable Gain Control • Wired Secondary Remote Gain Control Included • Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output

The MB Quart NA4-400.2 Nautic is a compact 2-channel amplifier engineered for reliable, high-output performance in marine and powersports environments. Built around a highly efficient Class D topology, it delivers up to 400 watts of total power while maintaining a small footprint that fits easily into tight installation spaces. Designed for harsh conditions, the amplifier features IP67-rated protection along with fully potted internals. This sealing process protects critical components from water, dust, vibration, and corrosion, making it ideal for boats, UTVs, and other outdoor applications where durability is critical. An aluminum heatsink further improves thermal management, allowing the amplifier to perform consistently under load. On the audio side, MB Quart’s Q-Stasis low-noise preamp circuit helps reduce incoming signal noise, improving clarity across the entire frequency range. With a response of 6Hz to 29kHz and a signal-to-noise ratio greater than 105 dB, the NA4-400.2 is capable of clean, full-range sound reproduction. Variable high-pass and low-pass crossovers (12 dB/octave) provide flexible tuning, making it easy to dial in performance for a wide range of speaker setups. Installation is streamlined with quick-connect power, speaker, and RCA terminals, along with corrosion-resistant nickel-plated connections. Integrated protection circuitry monitors thermal, overload, DC, and speaker faults, with LED indicators for system diagnostics. Specifications Model: NA4-400.2 Channels: 2 Amplifier Class: Class D (Full Range) Max Power: 400W Power @ 4 Ohms: 2 x 100W Power @ 2 Ohms: 2 x 200W Frequency Response: 6Hz – 29kHz Signal to Noise Ratio: >105 dB Total Harmonic Distortion (THD): 1.0% High Pass Crossover: 15Hz – 300Hz (12 dB/Octave) Low Pass Crossover: 50Hz – 300Hz (12 dB/Octave) Input Sensitivity: 0.2V – 9V IP Rating: IP67 Fuse Rating: 30A x 1
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.



































