Memphis Car Audio - Memphis Audio MJP800.4 4-Channel 800 Watt Amplifier - 200 Watts RMS x 4 at 2-Ohm - Black/Gray
More Buying Options
Specifications
- Amplifier ClassDNumber Of Channels4Bass BoostVariable
- Key Specs
- Amplifier Class: D (An amplifier's mode of operation, specifically the conditions in which its electrical current flows for the duration of an audio signal, determines its class. Each class has its strengths and weaknesses when it comes to power efficiency, levels of crossover distortion, and overall sound quality.)
- Number Of Channels: 4
- Bass Boost: Variable (Circuitry that boosts the bass response of the amplifier, improving audio reproduction enhancing the sound of low frequencies. Fixed boost means the level of bass response is preset, whereas variable boost allows the user to make adjustments.)
- General
- Brand: Memphis Car Audio
- Model Number: MJP800.4
- Product Name: Memphis Audio MJP800.4 4-Channel 800 Watt Amplifier - 200 Watts RMS x 4 at 2-Ohm
- Color: Black/Gray
- Audio Power
- Total Power Handling RMS: 800 watts
- Total Power Handling Maximum: 1600 watts
- Amplifier Class: D (An amplifier's mode of operation, specifically the conditions in which its electrical current flows for the duration of an audio signal, determines its class. Each class has its strengths and weaknesses when it comes to power efficiency, levels of crossover distortion, and overall sound quality.)
- Audio
- Number Of Channels: 4
- Bass Boost: Variable (Circuitry that boosts the bass response of the amplifier, improving audio reproduction enhancing the sound of low frequencies. Fixed boost means the level of bass response is preset, whereas variable boost allows the user to make adjustments.)
- Features
- Bluetooth Enabled: false (The device is capable of communicating with another device via Bluetooth, provided they are within the required range of each other. A Bluetooth-enabled device must also be the same Bluetooth version or higher than the accessory it is intended to pair with.)
- Marine: false
- Dimensions
- Product Height: 11.800 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 3.700 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 9.000 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 5.1 pounds (The out of box weight of the item.)
- Warranty
- Warranty - Parts: 1-Year Manufacturer Warranty
- Warranty - Labor: None
- Other
- UPC: 702588006060
Memphis Audio MJP800.4 4-Channel 800 Watt Amplifier - 200 Watts RMS x 4 at 2-Ohm — Features: Extruded aluminum Heatsink; 12dB/octave butterworth crossovers; Variable crossovers; 3 EQ boost settings - 0, 6, 12dB; Strap-able mono block amps. Specifications: RMS Power/CH @ 4: 125x4; RMS Power/CH @ 2: 200x4; RMS Power/CH @ 1: na; RMS Power/Bridge 4 Ohms: 400x2; THD: <1%; Signal/Noise Ratio: >80dB; Frequency Response ± 0.5dB: 10Hz – 25kHz; Crossover Frequency (HPF): 50-250kHz; Crossover Frequency (LPF): 50-250Hz; Subsonic: na; Dimensions (in): 7.5 x 2 x 8.7"; Input Range: 400mV - 7.5V LOW LEVEL, 3V-20V HIGH LEVEL; Crossover slope: 12db crossovers.
- Key Feature: 4-channel full-range amplifier rated at 125W RMS x 4 @ 4Ω, 200W RMS x 4 @ 2Ω, or 400W RMS x 2 bridged @ 4Ω, giving you flexible power options for front/rear speakers, components, or a combination of speakers and small subs.
- Key Feature: Built on an extruded aluminum heatsink chassis measuring approximately 7.5" x 2" x 8.7", designed to help manage heat while keeping the amplifier compact enough for under-seat, trunk, or side-panel installations.
- Key Feature: Features 12dB/octave Butterworth crossovers with variable high-pass and low-pass filters (HPF: 50–250Hz, LPF: 50–250Hz), allowing you to tailor the frequency range going to each channel for component sets, coaxials, or bridged midbass/sub setups.
- Key Feature: Includes 3-position EQ boost (0, +6, +12dB) so you can add controlled emphasis where needed, along with a frequency response of 10Hz–25kHz, THD under 1%, and a signal-to-noise ratio greater than 80dB for clean, wideband audio performance.
- Key Feature: Offers a broad input sensitivity range of 400mV–7.5V (low level) and 3V–20V (high level), making integration straightforward with aftermarket head units and many factory systems that provide either preamp or speaker-level outputs.
- Key Feature: 4-channel full-range amplifier rated at 125W RMS x 4 @ 4Ω, 200W RMS x 4 @ 2Ω, or 400W RMS x 2 bridged @ 4Ω, giving you flexible power options for front/rear speakers, components, or a combination of speakers and small subs.
- Key Feature: Built on an extruded aluminum heatsink chassis measuring approximately 7.5" x 2" x 8.7", designed to help manage heat while keeping the amplifier compact enough for under-seat, trunk, or side-panel installations.
- Key Feature: Features 12dB/octave Butterworth crossovers with variable high-pass and low-pass filters (HPF: 50–250Hz, LPF: 50–250Hz), allowing you to tailor the frequency range going to each channel for component sets, coaxials, or bridged midbass/sub setups.
- Key Feature: Includes 3-position EQ boost (0, +6, +12dB) so you can add controlled emphasis where needed, along with a frequency response of 10Hz–25kHz, THD under 1%, and a signal-to-noise ratio greater than 80dB for clean, wideband audio performance.
- Key Feature: Offers a broad input sensitivity range of 400mV–7.5V (low level) and 3V–20V (high level), making integration straightforward with aftermarket head units and many factory systems that provide either preamp or speaker-level outputs.
Whats Included
- Memphis Audio MJP800.4 4-Channel 800 Watt Amplifier - 200 Watts RMS x 4 at 2-Ohm
- Memphis Audio MJP800.4 4-Channel 800 Watt Amplifier - 200 Watts RMS x 4 at 2-Ohm
Compare similar products
Memphis Audio MJP800.4 4-Channel 800 Watt Amplifier - 200 Watts RMS x 4 at 2-Ohm — Features: Extruded aluminum Heatsink; 12dB/octave butterworth crossovers; Variable crossovers; 3 EQ boost settings - 0, 6, 12dB; Strap-able mono block amps. Specifications: RMS Power/CH @ 4: 125x4; RMS Power/CH @ 2: 200x4; RMS Power/CH @ 1: na; RMS Power/Bridge 4 Ohms: 400x2; THD: 80dB; Frequency Response ± 0.5dB: 10Hz – 25kHz; Crossover Frequency (HPF): 50-250kHz; Crossover Frequency (LPF): 50-250Hz; Subsonic: na; Dimensions (in): 7.5 x 2 x 8.7"; Input Range: 400mV - 7.5V LOW LEVEL, 3V-20V HIGH LEVEL; Crossover slope: 12db crossovers.
Boost the bass in your car with this KICKER 1200W mono amplifier. Stability at 1 ohm allows for use of multiple sound system wiring options, while a subsonic filter at 24dB protects speakers from dangerous frequencies. This KICKER 1200W mono amplifier features 12dB crossovers to control sound precisely and comes with vertical mounting hardware for unique configurations.
The GM-DX871 is a 1-channel subwoofer amplifier that can deliver up to 800 watts RMS to your subwoofer, providing powerful bass with a strong and heavy beat. CTA-2006 compliant, this highly efficient Class D amplifier offers impressive, high-quality power in a compact chassis. The speaker-level inputs allow you to install this amp in a factory system without RCA connections. The built-in low-pass filter lets you optimize the sound for your vehicle's interior. Additionally, a wired bass control remote enables you to easily adjust the amount of bass from the subwoofer output. The GM-DX871 amplifier uses high-current, high-grade electronic components and gold-plated RCA connections to ensure maximum performance.
Add some power to your car audio system with the SOUNDSTORM 1200 Watt 2 Channel Full Range Car Audio Amplifier.The lowest impedance accepted by this amplifier is 2 ohms producing more power resulting in more volume. The class A/B amplifier produces great sound quality while performing more efficiently than pure class A amplifiers. It includes both high and low inputs providing flexibility by allowing you to build an audio system using any standard factory or aftermarket source unit. The bass boost allows you to adjust the low bass within boost range to the way you like it. For safety and security, the thermal protection circuit turns the amp off if too hot allowing it to cool down before turning it back on. The variable low-pass filter function gives you control over frequencies that pass-through your subwoofer.Jam out with more power and quality with the SOUNDSTORM 1200 Watt 2 Channel Full Range Car Audio Amplifier.
| Pros for Memphis Car Audio - Memphis Audio MJP800.4 4-Channel 800 Watt Amplifier - 200 Watts RMS x 4 at 2-Ohm - Black/Gray | |||
|---|---|---|---|
| There were no pros for this product— | Power, Sound Quality, Size, Ease of use, Bass | Power, Sound Quality, Size, Ease of use, Price | There were no pros for this product— |
| Cons for Memphis Car Audio - Memphis Audio MJP800.4 4-Channel 800 Watt Amplifier - 200 Watts RMS x 4 at 2-Ohm - Black/Gray | |||
| There were no cons for this product— | Heat | Heat | There were no cons for this product— |
Specs
Reviews
This product doesn't have any reviews yet.
