NVX - XFLOC4 4-Channel 160W Adjustable Line Output Converter with Remote Turn On

Easily add an aftermarket amplifier to your vehicle’s factory audio system with the LocPRO 4-Channel Line Output Converter by PAC. The LP6-4 converts speaker-level (high-level) audio signals to RCA preamp (low-level) signals so you can install an aftermarket amplifier without replacing your factory radio. This four-channel line output converter can also be used to retain your vehicle’s OEM amplified audio system when replacing the factory radio.

Product Details: Active line output converter and line driver. 6-channels of speaker-level inputs handle up to 40V (400 watts RMS). 6-channels of RCA outputs Provides up to 9. 5 Volts of output. Designed to work with factory audio systems. Auto turn-on via DC offset or Audio detection. Load selection switch (20, 60, or 20K ohm) to prevent factory stereo shut-down. Adjustable 0 - 12dB Bass Boost (Fixed at 45 Hz). Selectable Full Range or Low Pass Filter switch (LPF Sub channel only): 250Hz. Input selector switch for 4 or 6 channel modes. 12 Volt turn-on output for aftermarket amplifiers. Selectable Ground Isolation switch to eliminate ground and alternator noise. Molex terminals for speaker signal and power. Wired remote bass level control included. LED Clip indicator. Total Harmonic Distortion: 0. 01%. Signal to Noise: >110 dB. Frequency Response: 10-20, 000 Hz. 1-year Manufacturer's Warranty.

Easily add an aftermarket amplifier to your vehicle’s factory audio system with the LocPRO Advanced 2-Channel or 4-Channel Active Line Output Converter with Auto Turn-On by PAC. The LPA-E.4 converts speaker-level (high-level) audio signals to RCA preamp (low-level) signals so you can install an aftermarket amplifier without replacing your factory radio. This two or four-channel active line output converter can also be used to retain your vehicle’s OEM amplified audio system when replacing your factory radio.