NVX - XLCA2 X-Series 2-Channel Line Out Converter Digital Bass Enhancer with xBOOST and Remote Level Control

Product Details: Active line output converter and line driver. 2-channels of speaker-level inputs handle up to 40V (400 watts RMS). 2-channels of RCA outputs Provides up to 9. 5 Volts of output. Designed to work with factory audio systems. Auto turn-on via DC offset or Audio detection. Load selection switch (20, 60, or 20K ohm) to prevent factory stereo shut-down. Adjustable 0 - 12dB Bass Boost (Fixed at 45 Hz). Selectable Full Range or Low Pass Filter switch (LPF): 250Hz. 12 Volt turn-on output for aftermarket amplifiers. Selectable Ground Isolation switch to eliminate ground and alternator noise. Molex terminals for speaker signal and power. LED Clip indicator. Total Harmonic Distortion: 0. 01%. Signal to Noise: >110 dB. Frequency Response: 10-20, 000 Hz. 1-year Manufacturer's Warranty.

Add an amplifier to nearly any radio with the KISLOC2 Stereo Line-Out Converter. Experience true sonic accuracy at any volume level with all the sparkling highs and thunderous lows of your original audio. KISLOC2 Stereo Line-Output Converter Unlike traditional LOCs the KISLOC2 is designed without inductors to deliver a completely flat frequency response at all volume levels. Using nothing more than your factory speaker wires the innovative KISLOC2 automatically converts the speaker signal into both an RCA signal and a powerful 100 milli-amp 12-volt remote wire using DC offset. Powerful enough to turn on multiple amplifiers the 12-volt remote wire delivers plenty of power without hunting for a switched 12-volt power source. Accepts up to 55 watts (16 volts) of input signal Fully compatible with standard radios and most smart radios* Delivers up to an 8-volt output signal Flat 20Hz-20kHz frequency range at all volume levels Includes a powerful 100 milli-amp remote turn-on wire. No 12V power source needed! LED indicator for DC offset turn-on *Amplifier output of smart radio must have 60 impedance or lower. What's in the Box 46KISLOC2 line output converter Owner's manual Specifications Accepts up to 55 watts (16 volts) of input signal Fully compatible with standard radios and most smart radios* Delivers up to an 8-volt output signal Flat 20Hz-20kHz frequency range at all volume levels Includes a powerful 100 milli-amp remote turn-on wire. No 12V power source needed! LED indicator for DC offset turn-on

Product Details: Active 2-channel line output converter and line driver. Designed to work with factory and aftermarket audio systems. Speaker-level inputs handle up to 30V (225 watts RMS). Low-level RCA inputs handle 150 mV - 2 Volts. RCA outputs Provides up to 9. 5 Volts of output. Adjustable xBOOST corrects for bass roll-off. Auto turn-on via DC offset or Audio detection. Load selection switch (20, 60, or 20K ohm) to prevent factory stereo shut-down. 12 Volt turn-on output for aftermarket amplifiers. Selectable Ground Isolation switch to eliminate ground and alternator noise. Molex terminals for speaker signal and power. Wired remote bass level control included. LED Clip indicator. Total Harmonic Distortion: 0. 001%. Signal to Noise: >105 dB. Frequency Response: 10-25, 000 Hz. Authorized Internet Dealer. 1-year Manufacturer's Warranty.