NVX - XLCA2X X-Series PRO 2-Channel Line Out Converter Digital Bass Enhancer xBOOST, Impedance Matching, Remote Level Control
Reviews coming soon
Related Item
About This Item
- General
- Brand: NVX
- Model Number: xlca2x
- Product Name: XLCA2X X-Series PRO 2-Channel Line Out Converter Digital Bass Enhancer xBOOST, Impedance Matching, Remote Level Control
- Compatibility
- Product Compatibility: Audio/Video
- Product Type: Line output converter
- Other
- UPC: 810021844589
Product Details: Active 2-channel line output converter and line driver. Designed to work with factory and aftermarket audio systems. Speaker-level inputs handle up to 30V (225 watts RMS). Low-level RCA inputs handle 150 mV - 2 Volts. RCA outputs Provides up to 9. 5 Volts of output. Adjustable xBOOST corrects for bass roll-off. Auto turn-on via DC offset or Audio detection. Load selection switch (20, 60, or 20K ohm) to prevent factory stereo shut-down. 12 Volt turn-on output for aftermarket amplifiers. Selectable Ground Isolation switch to eliminate ground and alternator noise. Molex terminals for speaker signal and power. Wired remote bass level control included. LED Clip indicator. Total Harmonic Distortion: 0. 001%. Signal to Noise: >105 dB. Frequency Response: 10-25, 000 Hz. Authorized Internet Dealer. 1-year Manufacturer's Warranty.
- 2-Channel Line Out Converter w/ Digital Bass Enhancer xBOOST: X-Series PRO 2-channel line out converter enhances car audio with adjustable xBOOST to correct bass roll-off for deeper sound. Handles up to 30V (225W RMS) and delivers up to 9.5V output for strong audio performance. Features auto turn-on via DC offset or signal detection and a load switch (20, 60, or 20K ohms) to prevent factory radio shutdown. Includes wired remote for easy bass level adjustment.
Reviews
This product doesn't have any reviews yet.
Compare similar products
Product Details: Active 2-channel line output converter and line driver. Designed to work with factory and aftermarket audio systems. Speaker-level inputs handle up to 30V (225 watts RMS). Low-level RCA inputs handle 150 mV - 2 Volts. RCA outputs Provides up to 9. 5 Volts of output. Adjustable xBOOST corrects for bass roll-off. Auto turn-on via DC offset or Audio detection. Load selection switch (20, 60, or 20K ohm) to prevent factory stereo shut-down. 12 Volt turn-on output for aftermarket amplifiers. Selectable Ground Isolation switch to eliminate ground and alternator noise. Molex terminals for speaker signal and power. Wired remote bass level control included. LED Clip indicator. Total Harmonic Distortion: 0. 001%. Signal to Noise: >105 dB. Frequency Response: 10-25, 000 Hz. Authorized Internet Dealer. 1-year Manufacturer's Warranty.
Add an amplifier to nearly any radio with the KISLOC2 Stereo Line-Out Converter. Experience true sonic accuracy at any volume level with all the sparkling highs and thunderous lows of your original audio. KISLOC2 Stereo Line-Output Converter Unlike traditional LOCs the KISLOC2 is designed without inductors to deliver a completely flat frequency response at all volume levels. Using nothing more than your factory speaker wires the innovative KISLOC2 automatically converts the speaker signal into both an RCA signal and a powerful 100 milli-amp 12-volt remote wire using DC offset. Powerful enough to turn on multiple amplifiers the 12-volt remote wire delivers plenty of power without hunting for a switched 12-volt power source. Accepts up to 55 watts (16 volts) of input signal Fully compatible with standard radios and most smart radios* Delivers up to an 8-volt output signal Flat 20Hz-20kHz frequency range at all volume levels Includes a powerful 100 milli-amp remote turn-on wire. No 12V power source needed! LED indicator for DC offset turn-on *Amplifier output of smart radio must have 60 impedance or lower. What's in the Box 46KISLOC2 line output converter Owner's manual Specifications Accepts up to 55 watts (16 volts) of input signal Fully compatible with standard radios and most smart radios* Delivers up to an 8-volt output signal Flat 20Hz-20kHz frequency range at all volume levels Includes a powerful 100 milli-amp remote turn-on wire. No 12V power source needed! LED indicator for DC offset turn-on
Easily add an aftermarket amplifier to your vehicle’s factory audio system with the LocPRO 4-Channel Line Output Converter by PAC. The LP6-4 converts speaker-level (high-level) audio signals to RCA preamp (low-level) signals so you can install an aftermarket amplifier without replacing your factory radio. This four-channel line output converter can also be used to retain your vehicle’s OEM amplified audio system when replacing the factory radio.
This Maestro ADS-MRR radio replacement and steering wheel interface allows you to control an aftermarket radio from the steering wheel of your compatible vehicle with programmable buttons that you can assign functions to from the Internet.
| Pros for NVX - XLCA2X X-Series PRO 2-Channel Line Out Converter Digital Bass Enhancer xBOOST, Impedance Matching, Remote Level Control | |||
|---|---|---|---|
| There were no pros for this product— | Overall Performance, Ease of use, Installation, Compatibility, Remote Turn-On | Ease of use, Installation, Compatibility, Sound Quality, Line Output | Ease of use, Overall Performance, Compatibility, Installation, Steering Wheel Controls |
| Cons for NVX - XLCA2X X-Series PRO 2-Channel Line Out Converter Digital Bass Enhancer xBOOST, Impedance Matching, Remote Level Control | |||
| There were no cons for this product— | Price | RCA Jacks | Price, Backup Camera |
Specs
More to consider
$9.49The price was $11.99
Enjoy your ride Sponsored
Top Deal$159.99The price was $199.99
