Ortofon - LW-800S Silver Headshell Leads - Multi

Stylus 2M Blue Replacement StylusRecommended for the following cartridges2M BlueInterchangeable with 2M RedNote: Shipped with Stylus protection guard for protection in transit be sure to remove guard after installation.What's in the Box:Stylus 2M Blue Replacement StylusSpecificationsFrequency range: 20 - 25000HzFrequency response: 20 - 20000Hz 2/0dBCompliance dynamic lateral: 20μm/mNStylus type: Nude EllipticalStylus tip radius: r/R 8/18μmTracking force range: 1.6 - 2g (16 - 20mN)Tracking force recommended: 1.8g (18mN)Tracking angle: 20°Recommended for the following cartridges2M BlueInterchangeable with 2M Red

The LH-6000 is a high-quality headshell recommended for the MC Windfeld Ti and the Cadenza Series. Its rounded front portion facilitates proper mounting and compliments each of these cartridges.Easy & Convenient ConnectionAll Ortofon cartridges have a color coding of the terminals indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system whenever connected inside the cartridge. We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell. Please remember correct orientation of the leads. Ortofon cartridges' terminal PINs diameter is 1.2 mm while Ortofon headshells' PINs diameter is only 1.0 mm. What's in the BoxLH-6000 HeadshellLead WiresSpecifiationsMounting distance: 36.6 mm - 42.4 mmHeadshell material: MagnesiumWeight without screws: 13.5 gramsHeadshell length: 47.5 mmHeadshell width: 19.1 mm

The LH-2000 is a basic high-quality headshell designed specifically for HiFi applications. Providing a clean minimalist aesthetic the LH-2000 is great for a wide variety of cartridges e.g. the 2M Series.FeaturesHigh-Quality HiFi HeadshellSolid Aluminum ConstructionWide Cartridge CompatibilityIncluded Connection LeadwiresFlexible Cartridge MountingEasy & Convenient ConnectionAll Ortofon cartridges have a color coding of the terminals indicating red and green for right channel respectively the hot and ground terminal. White and blue for left channel respectively the hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system whenever connected inside the cartridge. Ortofon recommends connecting lead wires to the cartridge and headshell before mounting the cartridge on the headshell.What's in the BoxLH-2000 HeadshellLeadwiresManualSpecificationsUniversal MountMaterial: Solid aluminum buildWeight: 15.5gMounting distance: Min 32.5mm max 41.9mmHeadshell Length: 50.3 mmHeadshell Width: 20.0 mm